Riso ComColor X1 series Technical Manual page 493

Panel Messages
Type W47: Image adjustment failed
Display
No message
Clear
Press the Close button.
Point Description
0224 Invalid calibration pattern scanned by the scanner when executing image adjustment in test mode.
No image adjustment fi le in the USB memory device.
0255
< When test mode No.455 [Image Adjustment File Transmit] was executed, the image adjustment fi le did not
exist in the USB memory device.>
Type W48: Duplicate fi le names on USB memory device
Display
The fi le of this name exists preservation ahead. Are you sure to overwrite it?
Do one of the following.
Clear
• Press the Continue button.
• Press the Cancel button.
Point Description
When users attempt to save fi les on the USB memory device, the printer found fi les with the same name on
the device.
0060 1-5
Variation code: 1: Account record list (log), 2: Job charge count, 3: Details count, 4: Limit qty. summary list, 5:
Data for which online transmission failed
Type W49: USB memory save error
The data cannot be saved in the USB fl ash drive. Check the USB fl ash drive.
Display
-Number of fi les, Capacity & Write protected
Clear
Press the Close button.
Point Description
Unable to save the fi les on a USB memory device.
0054 1-3
1-Scan fi les, 2-Rev fi les, 3-Other fi les
When users attempt to save fi les on a USB memory device, all available fi le names have been used on the
0061 1-3
device (all fi les already exist on the device).
1-Scan fi les, 2-Rev fi les, 3-Other fi les
Unable to save the fi les on a USB memory device because the memory device does not have enough space.
0062 1-3
1-Scan fi les, 2-Rev fi les, 3-Other fi les
Unable to save the fi les on a USB memory device because the memory device already have more than 100
0064 1-3
fi les.
1-Scan fi les, 2-Rev fi les, 3-Other fi les (Codes 1 & 3 not used at this moment)
Abnormality was detected in the data Store or Restore process between the USB memory device and HDD
and the process ended in error.
1-<The reason for the error is related to the machine model.>
2-<Not enough memory space in the USB memory device.>
3-<Actual machine serial number did not match with the machine serial number on the data name in the USB
0280 1-9 memory device.>
4-<The version information did not match.>
5-<HDD access error.>
6-<USB memory device access error.>
7-<Data error.>
8, 9-<Reserve>
Type W50: Paper size error(Paper Eject)
Paper of this size cannot be output with the current output tray.
Display
Check the paper setting orientation or the printer settings.
Clear
Press the Close button.
Point Description
0309 1-2
Cannot be output with the top tray.
0310 1-2 Cannot be output with the stacker tray.
0311 1-2
Cannot be output with the face down offset tray.
[ 15-62 ]