Riso ComColor X1 series Technical Manual page 794

1-3. Original Detection Sensor
(1) Turn OFF the scanner power, disconnect the power cable from the power source and remove the stage glass.
(2) Remove the Sensor cover. (IT screw 3x6 (11 pcs)).
(3) Disconnect 2 wire connectors while removing the Sensor cover.
Sensor cover
(4) Remove the Original detection sensor. (IT 3x8 screw (1 pc)).
(5) Unplug wire connector from the sensor.
Original detection
sensor
Connectors
[ 20-15 ]
HS5000 Scanner option
x1 Series ComColor (Revision 0.9)