Riso ComColor X1 series Technical Manual page 499

Panel Messages
Type W82: Print Control Device Error
[When the job is proceeding]
OPERATION INTERRUPTED
Login to device then press CONTINUE to resume.
job name ： (1)
Display
[When the job not existing]
AUTHENTICATION REQUIRED
Login to External Device Before Operation Is Available
Operate the External print limit device to be unlocked.
Clear
Then, press the Continue button.
If print cannot continue, press the Cancel button.
Point Description
5506
Printer is locked by "External print limit device"
Type W84: Paper size error(Offset Eject)
Paper of this size cannot be output with the offset output.
Display
Check the paper setting orientation or the printer settings.
Clear
Press the Close button.
Point Description
0318 1-2
Offset paper ejection was selected in the paper size that cannot handle.
W85: Security package mismatch.
Type
<This error displays only when the optional RISO Security Package is installed.>
Display
Unmutched software information. Call service.
Press Close button.
Clear
Install correct security package software or machine fi rmware which supports the security package.
Point Description
The machine fi rmware does not support the optional RISO Security Package.
6011 1-2
1-<The error displays when machine fi rmware is upgraded or downgraded.>
2-<The error displays when the optional RISO Security Package is installed.>
W86: Security package installation failed.
Type
<This error displays only when installing the optional RISO Security Package.>
Display Reinstall the security option. If recovery has failed, call service.
Press Close button.
Reinstall the security package.
Clear If reinstallation cannot be executed, purchase new security package and install.
Note: The machine will operate in the normal conventional condition when the Close button is pressed to
abort the security package installation.
Point Description
6012 1 USB memory device with the security package was not detected.
6012 2
USB memory device containing the security package was not 1 GB in size.
USB memory device containing the security package was switched to write-protect when trying to install the
6012 3
security software. Switch the USB memory device to write-enable.
6013 1
Abnormality was detected on the USB memory device during the installation of the security package software.
6013 2 Abnormality was detected during the installation of the security package software.
W87: Security package key-code error.
Type
<This error displays only when installing the optional RISO Security Package.>
Display
Check the security package key code.
Clear
Press Close button.
Point Description
The security package software installation failed due to the wrong key-code input.
6015 < Input the correct key-code again using the Test Modes No. 760, 761 and 762 after pressing the Close
button.>
[ 15-68 ]