Option
1-4. Major Components
˂ Paper Stacking Tray ˃
• Receives the printed papers
regardless of whether stapled or not.
• The paper receiving tray shifts to
the Front and Back when the offset
function is selected.
• The offset amount is 30mm
between each set of papers.
˂ Return Roller ˃
• Checks the height of the ejected
papers on the paper stacking tray.
to detect the maximum paper pile
height, which changes with the paper
ejection mode and paper type.
• Returns the ejected papers back all
the way back towards the wall of the
unit to align the ejected papers.
• The roller stays up away from the
ejected papers when Card papers or
Envelopes are printed.
[ 19-5 ]
˂ Paper Ejection Roller ˃
• Ejects the papers onto the paper
stacking tray.
• Pulls each paper back into the
staple area when the staple function
is selected.
• The roller nip is released while the
papers are aligned for stapling.
˂ Process Tray ˃
• When the staple function is
selected, each set of papers is
pooled on this tray until stapled.
[ 19-5 ]
Face Down Offset Stapler
˂ Reverse Rotation Roller ˃
• Pulls the papers back into the
Stapler unit when the stapling
function is selected.
˂ Stapler Assembly ˃
• With the drive of the Stapler slide
motor, the Stapler assembly is
transferred to the staple position in
accordance to the size of the paper
and selected stapling position.