Tray Shift Sensor 1 & Tray Shift Sensor 2 Removal - Riso ComColor X1 series Technical Manual

Hide thumbs Also See for ComColor X1 series:

Table of Contents

4-32. Tray Shift Sensor 1 & Tray Shift Sensor 2 removal

1. Remove the Tray Shift Motor Assembly.

2. Remove the Disc. (1 thin white plastic snap ring.)

Tray Shift Sensor 2

Tray Shift Sensor 1

3. Remove the Parallel Pin, Snap Ring and Metal Bushing.

4. Remove the Tray Shift Sensor Assembly. (IT screw 3x6 (4 pcs))

5. Unplug wire connectors from the two sensors.

6. Remove the Tray Shift Sensors 1 and 2.

Tray Shift Motor Assembly

Thin white plastic snap ring

Tray Shift Sensor Assembly

Tray Shift Sensors 1 and 2 (rear view)

Face Down Offset Stapler

Chapters

Table of Contents