Stapler Slide Hp Sensor Removal - Riso ComColor X1 series Technical Manual

Hide thumbs Also See for ComColor X1 series:

Table of Contents

Face Down Offset Stapler

PRECAUTION in Assembly:

Make sure to match the positions between the white Cam and black Disc.

4-33. Stapler Slide HP Sensor removal

1. Remove the Front Cover.

2. Remove the Offset Guide Assembly.

3. Remove the Cover Plate (front). (IT screw 3x6 (2 pcs))

4. Rotate the gear and slide the Stapler Assembly 10 millimeter or so to the rear from the HP position.

5. Remove the Stapler Slide HP Sensor. (IT screw 3x6 (1 pc))

6. Unplug wire connector from the sensor.

Stapler Assembly

Stapler Slide HP Sensor

Table of Contents