Riso ComColor X1 series Technical Manual page 737

Hide thumbs Also See for ComColor X1 series:

Table of Contents

Face Down Offset Stapler

4-16. Transfer Roller 1 & Transfer Roller 2 removal (these two rollers are interchangeable)

1. Remove the Jam Release Cover Assembly.

2. Remove the Paper Receive Guide Plate Assembly.

3. Remove the Transfer Guide Plate Assembly. (IT screw 3x6 (2 pcs))

Transfer Roller 2

Transfer Roller 1

4. Remove the plastic snap ring from

the left of the Transfer Rollers 1 and 2,

Plastic snap ring

Transfer Guide Plate

5. Remove the Transfer Rollers 1 and 2.

Shaft Joint (on the right-hand side of the roller shaft).

Chapters

Table of Contents