Riso ComColor X1 series Technical Manual page 632

Unit Checking (U)
5431 AF Original Feed Action
Transfers AF originals continuously, for as many cycles as there are loaded originals.
Transfers originals at the speed set in 05702 (test operation speed setting).
Scans the surface set in 05703 (test operation AF scanning settings).
5432 AF VR ADJ (P-CARD)
Adjusts the AF original paper guide VR, based on postcard-sized paper (100 mm).
5433 AF VR ADJ (A4R)
Adjusts the AF original paper guide VR, based on A4 Landscape paper (297 mm).
5-3-4. Initialization (I)
Initialization (I)
5501 Scanner Jam Clear
Forces paper jam errors to be cleared.
Because this test mode forces paper jam errors to be cleared, be sure to remove jammed originals in the scanner before
executing this test mode. (Remove paper in the AF original paper path.) If the paper is not removed, the scanner will remain
jammed with the jam error cleared, preventing subsequent scanner jams from being detected.
5508 Scanner Over-Parameter Clear
Restores default values of all out-of-range test setting values.
5509 Scanner Test Parameter Clear
Restores default values of all test setting values that have been changed from the default values.
* Data stored in EEPROM is also restored to the defaults.
* The following scanner tests are not restored to defaults.
05900–05902 (default FB scanning settings)
05903–05905 (default AF scanning settings)
* The printer must be restarted before setting values for 05740–05788 (default image detail settings) take effect.
5-3-5. Data Monitoring (C)
Data Monitoring (C)
No. Process Name
5600 Scanner Error Display
5605 Scanner TTL Control DSP
5606 FB Scan Count Display
5607 AF Scan Count Display
5608 Scanner Over-Parameter Display
5609 Scanner Test Parameter DSP
5610 FB Original Size
5630 AF Original Size
Confi rming White level
5631
compensation on Red Color
Confi rming White level
5632
compensation on Green Color
Confi rming White level
5633
compensation on Blue Color
5650 Color Profi le S/N
Upper: No./Process Name, Lower: Description
Upper: No./Process Name, Lower: Description
Confi rmation Items/Description
Displays errors that occurred on the scanner on the operation panel (error codes
and error names).
Shows the scanner total count Value on the operation panel.
Shows the scanner FB count Value on the operation panel.
Shows the scanner AF count Value on the operation panel.
Displays test numbers and setting Values on the operation panel for which scanner
test setting Values are out-of-range.
Displays test numbers and setting Values on the operation panel for which scanner
test setting Values have been changed from the defaults.
0-8, 13-19, 31, 255
00: No paper left, 01: A3, 02: B4, 03: A4, 04: A4 Landscape, 05: B5, 06: B5
Landscape,
07: A5, 08: A5 Landscape, 09: B6, 11: Postcard, 13: Ledger, 14: Legal, 15: Letter
16: Letter Landscape, 17 : Statement, 18: Statement Landscape, 19: Foolscap, 31:
Irregular
255: Unknown (loaded/not loaded)
0: OFF 1:ON
Displays white level compensation of the red color by the Value set by test mode
No.5706.
0: OFF 1:ON
Displays white level compensation of the green color by the Value set by test mode
No.5707.
0: OFF 1:ON
Displays white level compensation of the blue color by the Value set by test mode
No.5708.
The four-digit serial number of color profi les downloaded to the custom area of the
scanner are shown on the operation panel.
If none have been downloaded, the serial number is indicated as 0000.
[ 16-89 ]
OPTIONS / Scanner
OPTIONS / Scanner
OPTIONS / Scanner
Test Modes
Rev.1.00