External Paper Feed Section
2-10. Stripper Interlock Switch
1. Turn OFF the machine power and disconnect the power cable from the power source.
2. Remove the External paper feed unit.
3. Remove the Stripper interlock switch assembly. (Round tip IT3C screw 3x6 (1 pc))
4. Remove the Switch cover bracket. (Round tip IT3C screw 3x6 (1 pc))
5. Disconnect the wire harness connector.
6. Remove the Stripper interlock switch.
[ 4-20 ]
Switch cover bracket
Stripper interlock switch assembly
Stripper interlock switch assembly
Switch cover bracket
ComColor Series (Revision 2.4)