Riso ComColor X1 series Technical Manual page 621

Test Modes
Data Editing (D)
No. Process Name
4861 Stacker Tray Eject Single Staple
4862 Stacker Tray Eject Double Staple
4863 Stacker Tray Eject Z-fold Staple
4864 Z-Fold Number COMV B4
4865 Puncher Position Status
4866 Buffer-Paper Eject Setting
4867 Folder C Solenoid ON A4SEF
4868 Folder C Solenoid ON LETTER SEF
4869 Folder C Solenoid ON
4870 Booklet Full Time Small
4871 Booklet Full Time Large
4872 Mix Size Full Fail Status
4873 Small Size Max Stapling
4875 Dual Staple Move Adjustmet Front
4876 Dual Staple Move Adjustmet F/R
4877 Stack Hight Sensor 3 Enable
4878 Decular Auto Mode LED Enable
4879 Booklet Staple Adjustment FS
Sheet Exit Stack Height Sensor 2
4880
Enable
4881 Buffer Reverse Adjustment
4882 Envelope Folder Tray Full Count Enable
Rev.1.00
OPTIONS / Finisher
Default Unit/Range
0: Not ejected
0
1: Ejected
0: Not ejected
0
1: Ejected
0: Not ejected
0
1: Ejected
20 1-20sheet
0 0-3
3 1-10sec
86 0-160
86 0-160
120 60-160
20 10-100set
20 10-100set
0 0-1
100 0-200sheet
20 0-40
20 0-40
0: Disabled
0
1: Enabled
0: Disabled
0
1: Enabled
30 0-50
0: Disabled
0
1: Enabled
29 0-80
Specifi es whether the envelope folder tray is detected to be full
based on the quantity of sheets ejected.
0
0: Not detected for the quantity of sheets ejected (disabled)
1: Detected for the quantity of sheets ejected (enabled)
[ 16-78 ]
Description
Indicates the state of ejection to the stacker for
single-staple sets.
Indicates the status of ejection to the stacker
for dual-staple sets.
Indicates the status of ejection to the stacker
for stapled sets without z-folding.
Corresponding sheet quantity calculated for
one z-fold sheet (B4 or 8K)
Puncher position status immediately before
the printer is turned OFF.
Specifi es the time for auto ejection of buffer
sheets.
(Sheets are automatically ejected if, when a
sheet is in the fi nisher, the time specifi ed in
this setting elapses and another sheet does
not arrive.)
When A4SEF folder c-folding is used, this
test mode specifi es the starting time when
the folder c solenoid is activated by the folder
entrance sensor. (1=2.5ms)
When LET SEF folder c-folding is used, this
test mode specifi es the starting time when
the folder c solenoid is activated by the folder
entrance sensor. (1=2.5ms)
Specifi es the starting time when the folder c
solenoid is activated. (1=2.5ms)
When paper shorter than B4S is used, this
test mode specifi es the quantity of sets for
detecting when the booklet tray is full.
(Based on a guideline of 15 sheets per set.)
When paper B4S or longer is used, this
test mode specifi es the quantity of sets for
detecting when the booklet tray is full.
(Based on a guideline of 15 sheets per set.)
Records the status when Mix Size Full Fail
occurs immediately before the printer is turned
off.
Specifi es the maximum stapled sheets when
small paper (A4/LET LEF or smaller) is used.
Specifi es the amount of adjustment toward the
front during dual stapling. (1=0.157mm)
Specifi es the amount of adjustment of the dual
staple width during dual stapling. (1=0.157mm)
Specifi es whether stack height sensor 3 is
enabled.
Specifi es auto LED activation during decurler
operation when the decurler is in auto mode.
Adjusts the position of booklet staples in the
FS direction.Adjustment to a value larger than
30 moves the staple position toward the front.
(1=0.2618mm)
Specifi es adjustment of the height of stack
height sensor 2 when sheets are ejected.
Adjusts the amount of overlap of buffer sheets
in punch mode; in each size, the reverse pulse
+ NVM value. (1=0.52mm)