Staple Tray Paper Detection Sensor - Riso ComColor X1 series Technical Manual

Hide thumbs Also See for ComColor X1 series:

Table of Contents

Face Down Offset Stapler

4-24. Staple Tray Paper Detection Sensor

1. Remove the Offset Guide Assembly.

2. Staple Scratch Protection Arm Assembly.

3. Remove the Staple Tray Assembly.

4. Disconnect wire connectors. (2 pcs)

5. Remove the Staple Tray Paper Detection Sensor Assembly. (IT screw 3x6 (1 pc))

6. Unplug wire connector from the sensor and detach the sensor from the metal bracket. (1 connector)

Staple Tray Assembly

Staple Tray Paper Detection Sensor

Staple Tray Assembly

Table of Contents