Power Supply Unit Removal - Riso ComColor X1 series Technical Manual

Option

4-15. Power Supply Unit removal.

1. Remove the Rear Cover.
2. Remove the Power Supply Unit. (IT3C screw 4x8 (4 pcs))
3. Release one wire from the wire saddle on the right-hand bottom.
4. Unplug connectors from the right-hand side. (2 pcs)
5. Unplug a connector from the left-hand side. (1 pc)
［ 19-49 ］
Power Supply Unit
［ 19-49 ］
Face Down Offset Stapler