Riso ComColor X1 series Technical Manual page 486

Type W11: Stacking tray full
Display
The fi nisher stacking tray is full. Remove the paper.
Do one of the following.
Clear
• Press the Cancel button.
• Delete the job.
Point Description
3221 1
The stacking tray has almost reached the stacking limit for standard paper (detected by fi nisher).
3221 2 Sam as above (detected by printer).
3222 1
The stacking tray has almost reached the stacking limit for stapled paper (detected by fi nisher).
3222 2
Sam as above (detected by printer).
Type W12: Booklet tray full
Display
The fi nisher booklet tray is full. Remove the paper.
Do one of the following.
Clear
• Press the Cancel button.
• Delete the job.
Point Description
3223 1
The booklet tray has almost reached the stacking limit (detected by fi nisher).
3223 2 Sam as above (detected by printer).
Type W13: 3-fold tray full
Display
The fi nisher 3-fold tray is full. Remove the paper.
Do one of the following.
Clear
• Press the Cancel button.
• Delete the job.
Point Description
3224 1
The 3-fold tray has almost reached the stacking limit (detected by fi nisher).
3224 2 Sam as above (detected by printer).
Type W14: Envelope setting error
Printing on envelopes is selected.
Display
Check if another incompatible setting such as duplex printing or fi nisher setting has been specifi ed.
Do one of the following.
• Press the Select tray button and switch to a tray other than the tray specifi ed for envelope feeding.
• Press the Select tray button and change the paper feed settings of the tray in use to settings other than for
Clear
envelopes.
• Press the Cancel button.
• Delete the job.
Point Description
0240 Duplex printing or straight ejection by face-down printing is specifi ed for Envelope printing.
0301 1-2
3-fold printing is specifi ed for Envelope printing.
0302 1-2
2-fold printing is specifi ed for Envelope printing.
0303 1-2 Z-fold printing is specifi ed for Envelope printing.
0304 1-2 Stapling is specifi ed for Envelope printing.
0305 1-2
Punching is specifi ed for Envelope printing.
0306
Booklet printing is specifi ed for Envelope printing.
0307 1-2 Use stacker tray is specifi ed for Envelope printing.
0325 1-2
FD paper ejection job is selected on High Capacity Stacker envelope printing.
Type W15 : No factory setting restore data
Display
No message
Clear Press Close button.
Point Description
0270
Test Mode No.0451 [Engine Factory Value Restore] was activated, but there is no restore data in the HDD.
[ 15-55 ]
Panel Messages