Riso ComColor X1 series Technical Manual page 418

CONCEPT < Hard Disk (HDD) Replacement >
1 : Damgaged Hard Disk (HDD) removed.
Damaged HDD removed.
HARD DISK (HDD)
Engine Control PCB Data Backup Area
Test Mode setting on Engine Control PCB
(Image adjustment Test Modes included)
User Information Area
Admin. settings & User settings
Image Adjustment Parameter Backup Area by
Test Mode No. 440.
Image Adjustment Parameter
Firmware Install Area
PMS (Controller) Firmware
2-1 : Hard Disk (HDD) replaced and if machine powered back ON without fi rmware
< Brand new Spare Part >
downloading.
HARD DISK (HDD)
Engine Control PCB Data Backup Area
Test Mode setting on Engine Control PCB
(Image adjustment Test Modes included)
User Information Area
Default Admin. settings & User settings
< Factory Default of the very early Firmware>
Image Adjustment Parameter Backup Area by
Test Mode No. 440.
Image Adjustment Parameter
Firmware Install Area
PMS (Controller) default (low) Firmware
< Factory Default very early fi rmware version>
Counters
Automatically
Counters
restored to the
limit of the existing
fi rmware in HDD.
Adjustment Parameter Area
Test Mode setting on Engine Control PCB
(Image adjustment Test Modes included)
Adjustment Parameter Backup Area
Test Mode setting on Engine Control PCB
(Image adjustment Test Modes included)
Firmware Install Area
Adjustment Parameter Area
Test Mode setting on Engine Control PCB
(Image adjustment Test Modes included)
Adjustment Parameter Backup Area
Test Mode setting on Engine Control PCB
(Image adjustment Test Modes included)
Firmware Install Area
[ 14-67 ]
Electronic Components
ENGINE CONTROL PCB
Counters
Counters
Engine Firmware
ENGINE CONTROL PCB
Counters
Counters
Engine Firmware
Rev.1.00