Riso ComColor X1 series Technical Manual page 882

2-2. Removing the Stacker Tray Assembly
(1) Remove the Stacker Tray Bottom Cover by removing the E-rings and Spacers from the two locations.
> After these parts are reassembled, make sure that the Stacker Tray Bottom Cover moves up-and-down to
actuate the Stacker Safety Switch.
Stacker Tray Cover
(2) Unplug the two connectors for wires connected to the Stacker Tray from the rear, and release the wires from
the wire harness saddles.
Connectors
Wire harness saddles
Remove these two E-rings and Spacers
[ 24-67 ]
Multifunction Finisher II (option)
x1 Series ComColor (Revision 0.9)