Switchback Section
2-3. Switchback Unit A
1. Turn OFF the machine power and disconnect the power cable from the power source.
2. Remove the External paper feed unit.
< Switchback Unit A >
External paper feed unit
3. Remove the FD paper receiving tray.
External paper feed unit
4. Remove the Switchback motor.
5. Remove the Gear. (W sems screw 3x8 (1 pc))
6. Remove the metal bushing.
(Refer to Chapter 4 of this book)
(Refer to Chapter 4 of this book)
(Refer to the photograph below.)
Switchback motor
[ 10-8 ]
Gear
ComColor Series (Revision 2.4)