Riso ComColor X1 series Technical Manual page 778

Hide thumbs Also See for ComColor X1 series:

Table of Contents

11. Remove two mounting shoulder-screws of the Stapler Cable Guide (plastic).

Stapler Rail, unscrewed and moved out of the way.

12. Removing the Stapler Rail completely out of the unit enables the Stapler Cable to come out.

PRECAUTION IN ASSEMBLY:

The Base on which the Stapler Assembly is to be mounted should be positioned just at the entrance of the Front

Frame of the unit. Slide in only the Stapler Rail.

Stapler Cable Guide

The Base on which the Stapler is mounted.

Stapler Rail

Face Down Offset Stapler

Chapters

Table of Contents