Riso ComColor X1 series Technical Manual page 808

AF Original detection sensor
(1) Remove the original detection sensor after disconnecting the connector.
FRONT
The Stopper lever is positioned
above the projection from the
Original feed cover.
Projection from the
Original feed cover.
Arm is positioned
above the Stopper.
AF Original detection sensor
[ 20-29 ]
Actuator of the Original
detection sensor.
Stopper Lever
Stopper
Tip of the Stopper
is on top of the Arm.
REAR
x1 Series ComColor (Revision 0.9)
HS5000 Scanner option
Arm