Riso ComColor X1 series Technical Manual page 447

Panel Messages
Type S30: Switchback motor locked
!!System Error!!
Display Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
1041
Switchback motor locked error.
Type S31: Re-feed motor locked
!!System Error!!
Display Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
1042
Re-feed motor locked error.
Type S32: Ink pan error
!!System Error!!
Display Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
2020
The ink pan was retracted, but the ink pan storage sensor was not activated.
2021 The ink pan was retracted, but the ink pan operating position sensor was not deactivated.
2022
The ink pan was moved to the operating position, but the ink pan storage sensor was not deactivated.
The ink pan was moved to the operating position, but the ink pan operating position sensor was not
2023
activated.
2024
Ink pan operations were done, but they were not completed in time.
2025 The ink pan storage sensor and ink pan operating position sensor were both activated at once.
Type S33: Wiper action error
!!System Error!!
Display
Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
2030 The wiper moved towards the back, but the wiper motor HP sensor did not go ON.
2031 The wiper moved towards the front, but the wiper motor HP sensor did not go OFF.
2032
The wiper moved forward, but did not move for the given distance.
2033
Wiper drive was not fi nished in time.
Type S34: Ink cartridge unit error
!!System Error!!
Display
Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
The authorization cam was moved to the home position, but the authorization cam HP sensor was not
2040
activated.
The authorization cam was moved, but the printer did not detect activation of the authorization cam HP
2041
sensor in time.
[ 15-16 ]