Riso ComColor X1 series Technical Manual page 515

Panel Messages
Type X12: Paper jam in vertical path, lower section
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-7, paper jam errors.
Point Description
Paper being transferred did not reach vertical paper feed sensor 3 in time, based on the transfer speed.
1055 1-2
1-<Paper feed from Tray No.2>, 2-<Paper feed from Tray No.3>
Paper being transferred did not reach vertical paper feed sensor 5 in time, based on the transfer speed.
1057 1-3
1-<Paper feed from Tray No.1>, 2-<Paper feed from Tray No.2>, 3-<Paper feed from Tray No.3>
1073
Paper being transferred did not pass through vertical paper feed sensor 1 in time, based on the transfer speed.
1074
Paper being transferred did not pass through vertical paper feed sensor 2 in time, based on the transfer speed.
Paper being transferred did not pass through vertical paper feed sensor 3 in time, based on the transfer speed.
1075 1-2
1-<Paper feed from Tray No.2>, 2-<Paper feed from Tray No.3>
1111 Paper was still at vertical paper feed sensor 1 when paper transfer began.
1112 Paper was still at vertical paper feed sensor 2 when paper transfer began.
1113
Paper was still at vertical paper feed sensor 3 when paper transfer began.
Type X14: Main unit multiple feed
Display
Paper has been possibly double fed. Check the printed sheets.
Clear See pages 15-7, paper jam errors.
Point Description
During printing operations, the printer detected that multiple sheets have apparently been transferred at the
same time.
1102 1-5
1-<Paper feed from External paper feed tray.>, 2-<Paper feed from Tray No.1>
3-<Paper feed from Tray No.2>, 4-<Paper feed from Tray No.3>, 5-<Paper feed from High Capacity Feeder>
Type X17 Paper jam in interface module
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-7, paper jam errors.
Point Description
3140
Jam before paper reached decurler IN sensor
3141
Jam before paper reached decurler OUT sensor
3164
Paper remaining at decurler IN sensor
3165 Paper remaining at decurler OUT sensor
Type X18: Paper jam affecting puncher unit
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-7, paper jam errors.
Point Description
3142
Jam before paper reached punch OUT sensor
3143
Paper jammed at punch OUT sensor
3144 Jam before paper reached buffer path sensor
3145 Paper jammed at buffer path sensor
3166
Paper remaining at punch OUT sensor
3167
Paper remaining at buffer path sensor
Type X19: Paper jam affecting staple unit
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-7, paper jam errors.
Point Description
3146 Jam before paper reached compile exit sensor
3147
Paper jammed at compile exit sensor
3148
Paper jammed at compile paper sensor
3149 Jam before paper reached ejection sensor
3150
Paper jammed at ejection sensor
3168
Paper remaining at compile exit sensor
3169 Paper remaining at compile tray NO paper sensor
3170 Jam detected by ejection sensor
[ 15-84 ]