Riso ComColor X1 series Technical Manual page 481

Panel Messages
Type U106: PB glue empty error
An error has occurred in the perfect binder.
Display Press the reset key or Reboot by press the Sub Power Key
If recovery fails, contact a service provider.
Clear
Press the Reset key, or turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
Detected empty glue in the PB glue tank.
3560
Detects by the glue temperature by the thermistor placed at certain position.
U110: ＭＭ ejection guide error
Type
The Paper guide has an error.
Display
Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Press the Reset key, or turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
Detect by the sensor in detecting the state of the mail ejection fence-mail.
3672
Even if reset the ejection fence and restart, if error remains, possible hardware problem.
Type U111: High Cap Stacker is Locked
The High capacity stacker setting has not been completed.
Display
Call service. (The lock not yet released.)
Press the Reset key, or turn OFF the printer. (Turn OFF the printer through sub power key.)
Clear
Note: For a permanent solution, select [0:Permitted] in TM3968.
Point Description
3765 HCS unit is locked.
Type U115: Option power supply error
No output device is connected.
Display Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Press the Reset key, or turn OFF the printer. (Turn OFF the printer through sub power key.)
Clear
Note: For a permanent solution, select correct option setting in the Test Mode 1895.
Point Description
Option (Perfect Binder/Mail Maker) power supply error 6
5535
When perform test mode No.1895, there is option setting exist but option is not connected.
Type U116: Unsupported option error
An unsupported output device has been connected.
Display Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Press the Reset key, or turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
5551
Perfect Binder option is connected with A4/Letter model.
5552 Mail Maker option is connected with the model that has no inner paper feed tray unit.
5553
Mail Maker is connected with A4/Letter model.
Type U120: HCS stacker safety SW error
The high capacity stacker has an error.
Display
Press RESET key or Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Press the Reset key, or turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
3852 Detected the HCS Stocker Upper Safety Switch malfunction.
[ 15-50 ]