Riso ComColor X1 series Technical Manual page 667

Test Modes
Unit Checking (U)
7445 PB Cover Tray Lift Down
Starts and stops the PB Cover Tray lift-down.
7446 PB Glue Blade Height Check 1
At fi rst, clamp the body text, then glue it, fi nally stops after used the glue cut blade.
Need to place body text on the stacker before use this test mode.
Perform 7446 then 7447 in combination.
7447 PB Glue Blade Height Check 2
Move the mechanic to the position where before TM 7446 performed, then release clamp on body text, and stops.
Perform TM7446 fi rst, then TM 7447 as combination.
7448 PB Body Text Stack Position Check
Stop after stack the body text without clamping.
Perform this test mode together with one of following test modes. [TM7450], [TM7451], [TM7452]
Also, this test mode details can be set by TM7669 & TM7670.
7449 PB Cover Nipping Position Transport
Transport the cover to nipping position, then stops.
7450 PB Body Text Clamp Range Check
Clamp the body text, then move to home position, then stops.
Perform 7448 then 7450 in combination.
7451 PB Gluing Position Check
Clamp the body text, then move to gluing position, then stops.
Perform 7448 then 7451 in combination.
7452 PB Nipping Position Check
Clamp the body text, then move to nipping position (also height), then stops.
Perform 7448 then 7452 in combination.
7453 PB Guide Plate Open Position
Move the PB Guide plate to the open position.
7454 PB Guide Plate Close Position
Move the PB Guide plate to the close position.
7455 PB Test Print
Prints a PB test pattern.
Printing conditions (fi xed): Bind side is left.
Printing conditions (To be selected):
>Tray setting (TM1867)-Select Body text tray (Tray 1-3 cannot be used when used A5 wide size paper).
>Body text size (TM7671), Body text sheet quantity (TM7672), Cover length (TM7673), Cover tray selection (TM7674)
5-8-4. Initialization (I) - Not available
Rev.1.00
Upper: No./Process Name, Lower: Description
[ 16-124 ]
OPTIONS / Perfect Binder