Riso ComColor X1 series Technical Manual page 657

Test Modes
5-7-4. Initialization (I) - Not available
5-7-5. Data Monitoring (C)
Data Monitoring (C)
No. Process Name
3619 MM Loader Version
3620 MM Firmware Version
3621 MM Paper Feed Number
3673 MM PCB Area Temperature
5-7-6. Data Editing (D)
Data Editing (D)
No. Process Name
MM Guide Motor Speed
6005
Adjustment
MM Body to Form Switch Timing
6006
Adjustment (Speed 1)
MM Body to Form Switch Timing
6007
Adjustment (Speed 2)
MM Body to Form Switch Timing
6008
Adjustment (Speed 3)
MM Body to Form Switch Timing
6009
Adjustment (Speed 4)
6010 MM Test Pattern Print Setting
6011 MM Test Pattern Print Qty Setting
MM Form to Body Switch Timing
6012
Adjustment (Speed 1)
MM Form to Body Switch Timing
6013
Adjustment (Speed 2)
MM Form to Body Switch Timing
6014
Adjustment (Speed 3)
MM Form to Body Switch Timing
6015
Adjustment (Speed 4)
MM Jam Detection OFF Zone
6024
Adjustment
MM Jam Detection ON Zone
6025
Adjustment
Rev.1.00
Confi rmation Items/Description
Displays the MM loader version.
Displays the MM fi rmware version.
Displays the MM papaer feed number.
Display Value taken from the temperature sensor.
OPTIONS / Mail Maker
Default Unit/Range Description
Adjust Guide Motor speed by using the printer speed
990 900-1000 ratio.
(1=0.1%)
55 1-200ms
36 1-200ms
Adjust switching timing from the body paper transport path
to the form paper transport path by the MM Guide Set
Solenoid. (Correspond with the MM Guide Motor speed)
30 1-200ms
25 1-200ms
Select the speed for TM3426 (MM Test Pattern Print).
0: Form A (Duplex-Long edge) / No contents
1: Form A (Simplex) / Contents (A4-Inner 3 fold)
2: Form A (Duplex-Long edge) / Contents (A4-Inner 3 fold)
3: Form A (Simplex) / Contents (B5-Inner 3 fold)
4: Form A (Duplex-Long edge) / Contents (B5-Inner 3 fold)
5: Form B (Duplex-Long edge) / No contents
1
6: Form B (Simplex) / Contents (A4-2 fold)
7: Form B (Duplex-Long edge) / Contents (A4-2 fold)
8: Form C (Duplex-Long edge) / No contents
9: Form C (Simplex) / Contents (Letter-Inner 3 fold)
10: Form C (Duplex-Long edge) / Contents (Letter-Inner 3 fold)
11: Form C (Simplex) / Contents (Legal-4 fold)
12: Form C (Duplex-Long edge) / Contents (Legal-4 fold)
Use this setting for TM3426 (MM Test Pattern Print).
1 1-15sheet Select contents paper qty for TM6010. (If selected to have
envelope contents)
57 1-200ms
23 1-200ms
Adjust switching timing from the form paper transport path
to the body paper transport path by the MM Guide Set
Solenoid. (Correspond with the MM Guide Motor speed)
13 1-200ms
4 1-200ms
Adjust timing to disable MM jam detection.
0 (-100 -100)mm (Adjust timing against distance between MM Guide Sensor
and MM Form Receive Sensor.)
Adjust timing to enable MM jam detection.
0 (-100 -100)mm (Adjust timing against distance between MM Guide Sensor
and MM Form Receive Sensor.)
[ 16-114 ]
OPTIONS / Mail Maker