Riso ComColor X1 series Technical Manual page 463

Panel Messages
Type S99: Software Error
!!System Error!!
Display Reboot by press the Sub Power Key
If recovery has failed, call service.
Clear
Turn OFF the printer. (Turn OFF the printer through sub power key.)
Point Description
0076
Communication could not be established in PCI communication between the engine and controller sections.
0095 No machine code RFID tag
0096 1-7
Invalid machine code RFID tag
0116
Image control buffer problems were detected in the engine fi rmware.
0118 1 Detected the color defi nition information error during initialization in the X3-IP-PCB.
0118 2 Detected the color defi nition information error during operation in the X3-IP-PCB.
0119 1
K color image address error detected within the X3-IP-PCB.
0119 2
C color image address error detected within the X3-IP-PCB.
0119 3 M color image address error detected within the X3-IP-PCB.
0119 4
Y color image address error detected within the X3-IP-PCB.
0140
System error with CPU operating system
0141 1 Invalid logic or other problems involving maintenance unit control have caused a software bug.
0141 2 Time-out error related to maintenance unit control.
0142
Invalid logic or other problems involving ink circulation unit control have caused a software bug.
0143
Invalid logic or other problems involving ink supply unit control have caused a software bug.
0144 1 Invalid logic or other problems involving temperature unit control have caused a software bug.
0144 2
Invalid temperature set in test mode
0145 1
A software error in the engine system control module was detected.
A software error was detected in the engine system control module (image adjustment, data transfer
0145 2
processing).
0145 3 A software error was detected in the engine system control module (processing for downloading).
0145 4 A software error was detected in the engine system control module (controller SRQ processing).
0145 5
A software error was detected in the engine system control module (controller CDB and SDB processing).
0145 6
A software error was detected in the engine system control module (controller boot processing).
0145 7 An information overfl ow was detected in the engine system control module. (STS_03)
0145 8
An information overfl ow was detected in the engine system control module. (STS_07)
An information nonresponse was detected in the engine system control module from test mode control
0145 9
module.
0146 1
Invalid logic or other problems involving error control have caused a software bug.
0146 2 Invalid logic or other problems involving error recovery control have caused a software bug.
0146 3 Paper jam re-detection process exclusive condition error in the error recovery control module.
Wrong classifi cation recovery item was detected at the beginning of recovery action in the error recovery
0146 4
control module.
Wrong classifi cation recovery item was detected at the beginning of recovery phase changeover in the error
0146 5
recovery control module.
Wrong classifi cation recovery item was detected at the beginning of recovery information setup in the error
0146 6
recovery control module.
Wrong classifi cation recovery item was detected at the beginning of recovery information acquisition in the
0146 7
error recovery control module.
0146 8
Retry time-over for the ink pan position recovery action was detected in the error recovery control module.
0146 9 Retry time-over for the head cleaning recovery action was detected in the error recovery control module.
0147 Receipt of an unsupported test mode number or other problems have caused a software bug.
0148 3
Invalid parameters were detected in the HDR control module.
0148 4
Malfunctioning was detected in the HDR control module.
0148 5 Malfunctioning was detected in the HDR sub-CPU for head control PCU 1 (KC).
0148 6
Malfunctioning was detected in the HDR sub-CPU for head control PCU 2 (MY).
0148 7
Invalid parameters were detected in the CIS control module (paper width detection sensor).
0148 8 Malfunctioning was detected in the CIS control module (paper width detection sensor).
0149 1 Invalid parameters were detected in the controller PCB unit communication driver.
0149 2
Malfunctioning was detected in the controller PCB unit communication driver.
0149 3
Data overfl ow was detected in the controller PCB unit communication driver.
0150 1-5 Invalid parameters were detected in the image-generation module.
0150 9
Invalid parameters were detected in the image-generation module.
[ 15-32 ]