Page 1
Riso ComColor FW/GD/X1 Pre-Check Before using your Riso ComColor after a long period of non-use Turn machine ON • Wait until machine is finished warming up and in idle mode. • Press the round [Home button] located on the lower left-hand corner [GD/FW] [ Mode button] upper left-hand •...
Page 2
Riso ComColor FW/GD/X1 Pre-Check FW/GD Only CAUTION: Certify that the ink cartridges are not near empty • From the Home Screen, enter machine Test Mode area, using numeral keypad, press and hold [ * ] [ 8 ] [ #] until passcode is requested.