Comcolor Paper Jams; Reason For Jams; Position Of Paper Still In Printer - Riso ComColor X1 series Technical Manual

Panel Messages

2. ComColor Paper Jams

Information about paper jams identifi es the reason for the jam and the position of paper still in the printer.

2-1. Reason for Jams

The following three reasons for paper jams are reported in the error point as factors for detection.
1. "Not Arrived" error: Occurs when sensors in the paper path are not activated within the specifi ed period
2. "Still Present" error: Occurs when sensors in the paper path are not deactivated within the specifi ed
period
3. "Paper Remaining" error: Occurs when sensors in the paper path are activated when paper transfer
begins
If these errors are detected, the condition is interpreted as a paper jam.
Errors can be cleared when no detectable paper is left in the path.

2-2. Position of Paper Still in Printer

When paper jams, paper other than the jammed paper may still be left in the printer, in the paper path.
For this reason, after paper jams, the printer indicates information about the position of paper still in the printer.
H15
H11
H1
H10
H12
H13
H8
H9
H2
H3
H4
H6
H5
Front door group
Tray group
Paper feeding and ejection group
Switchback door group
Vertical paper feed group
[ 15-6 ]
H7
H14