Riso ComColor X1 series Technical Manual page 658

Data Editing (D)
No. Process Name
MM End Tamp Motor Start Timing
6030
(Speed 1)
MM End Tamp Motor Start Timing
6031
(Speed 2)
MM End Tamp Motor Start Timing
6032
(Speed 3)
MM End Tamp Motor Start Timing
6033
(Speed 4)
MM End Tamp Motor Start Timing
6036
(From nip position)
6037 MM Side Tamp Motor Start Timing
MM Side Tamp Motor Start Timing
6038
(From nip position)
6039 MM Side Tamping Pulse 1
6040 MM Side Tamping Pulse 2
6041 MM Side Tamping Number
MM Tamper Feed Motor Stop
6042
Timing (Speed 1)
MM Tamper Feed Motor Stop
6043
Timing (Speed 2)
MM Tamper Feed Motor Stop
6044
Timing (Speed 3)
MM Tamper Feed Motor Stop
6045
Timing (Speed 4)
MM Tamper Feed Motor Start
6048
Timing (From nip position)
MM Tamper Nip Motor Brake Time
6050
Setting
MM Top Tamper Hit to Retreat
6051
Position Switch Timing
MM Top Tamper Retreat to Hit
6052
Position Switch Timing
6053 MM Tamper Nip Motor Start Timing
MM Side Tamper Home Position
6054
Adjustment (A4)
MM Side Tamper Home Position
6055
Adjustment (B5)
MM Side Tamper Home Position
6056
Adjustment (Letter)
MM Side Tamper Home Position
6057
Adjustment (Legal)
MM Top Tamper Home Position
6058
Adjustment (A4)
MM Top Tamper Home Position
6059
Adjustment (B5)
MM Top Tamper Home Position
6060
Adjustment (Letter)
MM Top Tamper Home Position
6061
Adjustment (Legal)
OPTIONS / Mail Maker
Default Unit/Range Description
348 100-600ms
Adjust the time in various speeds.
247 100-600ms
Rear end edge of the body paper (n-th paper) been
detected by the MM Guide Sensor ↔ MM End Tamp Motor
starts
219 100-600ms
(Correspond with the MM Guide Motor speed)
190 100-600ms
Adjust the time.
150 20-500ms Nip position been detected by the MM Tamper Nip HP
Sensor ↔ MM End Tamp Motor starts
Adjust the time.
10 10-200ms
MM End Tamp Motor starts ↔ MM Side Tamp Motor starts
Adjust the time.
180 10-300ms Nip position been detected by the MM Tamper Nip HP
Sensor ↔ MM Side Tamp Motor starts
1st paper alignment operation amount by the MM Side
115 24-126pulse
Tamp Motor.
Second and subsequent paper alignment operation
28 24-100pulse
amount by the MM Side Tamp Motor.
Number of times for paper alignment operation by the MM
2 1-5time
Side Tamp Motor.
1004 10-1500ms
Adjust the time in various speeds.
689 10-1200ms
Top edge of the body paper (1paper) been detected by the
MM Guide Sensor ↔ MM Tamper Feed Motor stops
599 10-1150ms
(Correspond with the MM Guide Motor speed)
510 10-1050ms
Adjust the time.
130 10-500ms Nip position been detected by the MM Tamper Nip HP
Sensor ↔ MM Tamper Feed Motor starts
100 80-120ms Brake time of the MM Tamper Nip Motor.
Adjust switching timing from hit position to retreat position
50 10-200ms
of the top tamper plate by the MM Top Tamper Solenoid.
Adjust switching timing from retreat position to hit position
1 1-100ms
of the top tamper plate by the MM Top Tamper Solenoid.
Adjust the time.
200 10-300ms Top edge of the body paper been detected by the MM
Tamper Eject Sensor ↔ MM Tamper Feed Motor starts
0 (-25 - 94)pulse
(-105 - 14)
Adjust home position of the MM Side Tamper Plate at
0
pulse
mechanical initialization.
(Adjust home position movement stop timing of the MM
0 (-20 - 111)pulse
Side Tamper Motor.)
0 (-20 - 111)pulse
(-500 - 500)
0
pulse
(-41 - 500)
Adjust home position of the MM Top Tamper Plate at home
0
pulse
position return operation.
(Adjust home position movement stop timing of the MM
(-385 - 500)
0
Top Tamper Motor.)
pulse
(-500 - 43)
0
pulse
[ 16-115 ]
Test Modes
Rev.1.00