Riso ComColor X1 series Technical Manual page 273

7) Cut the 4 Ink tubes, which connects the Ink bus and Negative pressure ink tank, at the Cut-mark line above
the Negative ink tank.
kit.
Old type
Ink circulation system >
New type
Ink circulation system >
Cap the cut Ink tubes with the Caps included in the Ink circulation system spare part
( Type-1 & Type-2 )
( Type-3 & Type-4 )
On the New type ink supply unit, the Air tubes of the Negative
pressure ink tanks get in the way, so unhook the Air tubes from the
tube guide on the Ink circulation unit tower and hang the Air tubes
down.
[ 11A-61 ]
Ink Flow Section
Cut at the Cut-mark line.
<The Ink tubes, which connects
t h e I n k b u s a n d N e g a t i v e
pressure ink tank.>
Cut at the Cut-mark line.
<The Ink tubes, which connects
t h e I n k b u s a n d N e g a t i v e
pressure ink tank.>
ComColor Series (Revision 2.4)