Jam Errors (X) - Riso ComColor X1 series Technical Manual

Panel Messages

4-4. Jam Errors (X)

Type X01: No paper transfer from tray
Display Paper has been possibly misfed. Check the paper-feed tray.
Clear
See pages 15-7, paper jam errors.
Point Description
1050 Externally fed paper did not reach the registration sensor in time, based on the transfer speed.
1070 Externally fed paper did not pass the registration sensor in time, based on the transfer speed.
Type X02: Paper jam in main transfer section
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear See pages 15-7, paper jam errors.
Point Description
Paper being transferred did not reach top edge sensor 1 in time, based on the transfer speed.
1-<Paper feed from External paper feed tray.>
2-<Paper feed from Tray No.1>
1058 1-6 3-<Paper feed from Tray No.2>
4-<Paper feed from Tray No.3>
5-<Paper feed from Re-Feed section>
6-<Paper feed from High Capacity Feeder>
1059
Paper being transferred did not reach the paper elevation IN sensor in time, based on the transfer speed.
Paper being transferred did not pass through top edge sensor 1 in time, based on the transfer speed.
1-<Paper feed from External paper feed tray.>
2-<Paper feed from Tray No.1>
1078 1-6
3-<Paper feed from Tray No.2>
4-<Paper feed from Tray No.3>
5-<Paper feed from Re-Feed section>
6-<Paper feed from High Capacity Feeder>
1079 Paper being transferred did not pass the paper elevation IN sensor in time, based on the transfer speed.
1110
Paper was still at the registration sensor when paper transfer began.
1116
Paper was still at top edge sensor 1 when paper transfer began.
1117 Paper was still at the paper elevation IN sensor when paper transfer began.
Type X03: Paper jam in FU paper ejection section
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-7, paper jam errors.
Point Description
1065
Paper being transferred did not reach the FU paper ejection sensor in time, based on the transfer speed.
1085
Paper being transferred did not pass the FU paper ejection sensor in time, based on the transfer speed.
1123 Paper was still at the FU paper ejection sensor when paper transfer began.
Type X04: Paper jam in vertical paper feed section
Display Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear See pages 15-7, paper jam errors.
Point Description
1060
Paper being transferred did not reach the fl ipper sensor in time, based on the transfer speed.
Type X05: Paper jam in horizontal paper feed section
Display
Paper has jammed. A button appears in the jam. Touch the button to view the removal method.
Clear
See pages 15-7, paper jam errors.
Point Description
1080
Paper being transferred did not pass the fl ipper sensor in time, based on the transfer speed.
1118
Paper was still at the fl ipper sensor when paper transfer began.
[ 15-82 ]