Riso ComColor X1 series Technical Manual page 328

8. Manually rotate the gear (the second gear of the four, looking from the rear of the machine) in counter-
clockwise direction. Rotate the gear until the Maintenance unit arm moves to the position shown on the second
photograph, below, so that the maintenance unit can be pulled out.
9. With only the waste ink tube connected, pull out the maintenance unit out of the machine and place it on the
floor. Make sure to put something on top of the floor, before putting the Maintenance unit down, to protect the
floor from getting dirty with ink.
Maintenance unit arm
Maintenance unit
(Ink pan)
[ 12-9 ]
Waste Ink Section
ComColor Series (Revision 2.4)