Switchback Pass Sensor Removal - Riso ComColor X1 series Technical Manual

Hide thumbs Also See for ComColor X1 series:

Table of Contents

4-25. Switchback Pass Sensor removal

1. Remove the Jam Release Cover Assembly.

2. Remove the Paper Receive Guide Plate assembly.

3. Remove the Transfer Guide Plate. (IT screw 3x6 (2 pcs))

4. Using a stubby screwdriver, remove the Stay with the sensor attached. (IT screw 3x6 (2 pcs))

5. Remove the Switchback Pass Sensor Assembly from the Stay. (IT screw 3x6 (1 pc))

6. Detach the wire saddle. (1 pc)

7. Unplug the wire connector from the sensor and detach the sensor from the metal bracket.

Switchback Pass Sensor

Face Down Offset Stapler

Table of Contents