Riso ComColor X1 series Technical Manual page 285

Ink Flow Section
When Removing Heads Under the Ink Bus
When removing heads under the ink bus, move the ink bus on top of the Print head out of the way by the
procedure given below.
Ink bus
Print head
Remove the two mounting screws of the Ink bus, which is interfering with the removal of the Print head.
Using the two black colored plastic Bands mounted on the machine frame, hook the hole of the Band on the
pin located on the under-surface of the Ink bus.
This procedure will pull the Ink bus away from the Print head and make the room to work.
plastic Band
Pin
Pin
[ 11A-73 ]
ComColor Series (Revision 2.4)