Page 1
This guide describes total operation features and specifications. User's Guide 068-36005...
Page 2
(2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that unauthorized changes or modifications not approved by RISO could void the user's authority to operate the equipment.
This guide describes the actions to take when a paper jam or other problem occurs. About This Guide This guide may not be reproduced in whole or in part without the permission of RISO KAGAKU CORPORATION. The contents of this manual may be changed without prior notice due to product improvements.
[Login Setting] is set to [ON]. The screenshots and illustrations in this guide may vary depending on the machine model and usage environment, including the connected optional equipment. ComColor GL Series User's Guide...
Printing PDF files saved on USB flash drive PS kit PS kit Printing from macOS Print controller Printing from tablet or smartphone using RISO PRINT- PS kit S application PS Kit FG10 is not supported in some regions. ComColor GL Series User's Guide...
Corrects the balance of colors the original contains server and limit the use of this machine and also to bring colors closer to natural shades. print documents that have been saved on an external system. ComColor GL Series User's Guide...
Printouts Materials Not to Be Printed Ink Cartridge Storage and Handling Precautions Disposing of Used Ink Cartridges and Cleaning Tanks Part Names and Functions Main Unit and Optional Scanner Operation Panel Touch Panel [Home1] Screen ComColor GL Series User's Guide...
Page 9
Print Density ADF Scan & Pause Mixed Size Original Book Shadow Erasure Page Split Combine Image Repeat Booklet Stamp Page Border Image Quality Original Type Gamma Correction Image Control Base Color Level Image Position Overlay ComColor GL Series User's Guide...
Page 10
Scanning Level Original Orientation Resolution Mixed Size Original Page Size Book Shadow Erasure Page Split PIN Code Original Type Gamma Correction Image Control Base Color Level Reproduction Size Scan Job Build Scan Mode Function Buttons ComColor GL Series User's Guide...
Page 11
Saving the Scanned Data to a USB Flash Drive Printing a Document Saved on a USB Flash Drive List of Settings in [USB] - [Save] List of Settings in [USB] - [Load] USB Mode Function Buttons ComColor GL Series User's Guide...
Page 12
Creating and Registering a Barcode Area Definition File Procedure Repetition Function Printing Barcode Originals Chapter 8 Optional Equipment Face Down Finisher Caution Label List of Settings Printer Driver Settings Copy Mode Settings Additional Tray Loading the Paper High Capacity Feeder ComColor GL Series User's Guide...
Page 13
[Advanced] Tab [Environment] Tab RISO Console Settings Printable Files in the USB Flash Drive Font List Printing From Your Tablet or Smartphone Chapter 9 Appendix Maintenance Print Head Cleaning Front Cover Release Paper Guide Control ComColor GL Series User's Guide...
Page 14
Glue Temperature Maximum Pages per Mail About Ink Cartridges Ink Cartridge Replacement Specifications Consumables Ink Cartridges Index ComColor GL Series User's Guide...
If the ventilation openings are blocked, the inside of the machine may become hot and a fire might occur. Do not place the machine in a dusty or humid location. Otherwise, a fire or an electric shock might occur. ComColor GL Series User's Guide...
When using the IC card reader The IC card reader continually emits a weak signal. If you are using a cardiac pacemaker and notice any abnormalities, immediately move away from the machine. Consult a physician immediately. ComColor GL Series User's Guide...
Caution! A finger is caught. Do not put your fingers in the gap between the stacking tray unit and connecting plate. Doing so may result in your fingers being caught when opening or closing the stacking tray. ComColor GL Series User's Guide...
Installation surface level: 2° or less Operate the machine under the following environment conditions. Temperature range: 15 °C - 30 °C (59 °F - 86 °F) Humidity range: 40% - 70% RH (non- condensing) ComColor GL Series User's Guide...
You cannot directly connect the machine to a communication line offered by a telecommunication carrier (mobile communications company, fixed-line telecoms company, Internet provider, etc.) When connecting the machine to the network, make sure that the connection is made via a router etc. ComColor GL Series User's Guide...
Units: mm (inch) Main Unit with Optional Equipment Installed Provide sufficient space for opening the standard tray, the front cover, and the original cover of the scanner. • As seen from the front Units: mm (inch) ComColor GL Series User's Guide...
Page 21
Before Use • As seen from the side Units: mm (inch) ComColor GL Series User's Guide...
Page 22
Main unit, High Capacity Feeder, and Auto-Control Stacking Tray (82 15/32") 3,000 mm Main unit, High Capacity Feeder, Multifunction Finisher, and Folder Unit (118 1/8") 2,760 mm Main unit, High Capacity Feeder, and Multifunction Finisher (108 21/32") ComColor GL Series User's Guide...
Page 23
1,420 mm Folder Unit (55 29/32") 1,240 mm Main unit and Additional Tray (48 13/16") 1,240 mm Main unit and High Capacity Feeder (48 13/16") 1,315 mm Main unit and High Capacity Stacker (51 3/4") ComColor GL Series User's Guide...
• When scanning photos or printed documents, malfunctions. make sure the surface of the original is flat. • We recommend that you use an original with a font size of at least 5pt. ComColor GL Series User's Guide...
• Even when the paper size is within the maximum print area, a margin is always provided. • When copying, the machine cannot scan the 1 mm (3/64") margin of the original. ComColor GL Series User's Guide...
550 mm (3 9/16" × 5 27/32" - tray Standard tray: 13 3/8" × 21 5/8") Height up to 110 mm (4 5/16") Maximum Load High capacity feeder: Height up to 440 mm (17 11/32") ComColor GL Series User's Guide...
Page 27
If you leave the paper in the standard tray, the paper may curl and cause paper jamming. (It is recommended to take necessary sheets out of the wrapping paper and load them to the standard tray.) ComColor GL Series User's Guide...
Do not shake the ink cartridge. This can create bubbles, resulting in a deterioration in print quality. Do not add ink into the ink cartridge. Remove the ink cartridge from its plastic bag just before inserting it into the machine. ComColor GL Series User's Guide...
In the event of fire, use potassium carbonate mist, foam, powder, or a carbon dioxide fire extinguisher. Disposing of Used Ink Cartridges and Cleaning Tanks The ink in the cleaning tank cannot be used for printing. ComColor GL Series User's Guide...
Blue LED ON: Ready Standard Tray • Blue LED flashing: Machine is starting up or Load special paper (thick paper, envelopes, etc.) scanning here. You can also load plain paper. • Red LED flashing: Error has occurred ComColor GL Series User's Guide...
Page 31
Use the standard tray for thick paper and other special paper types. Paper Alignment Lever Use this lever to align the documents that are output. If the lever interferes with output, pull it up and lock it. ComColor GL Series User's Guide...
Reset Key Press this key to return the settings to their default values. • Only the settings for the selected mode are reset. The settings for other modes remain unchanged by this operation. ComColor GL Series User's Guide...
Page 33
This key lights up when this machine is in power saving mode. Pressing this key when it is lit makes the machine ready for operation. • Pressing this key when it is not lit makes the machine go into sleep mode. ComColor GL Series User's Guide...
Prepare a new ink cartridge for the color that flashes. • If you are not using RISO ink, the remaining amount of ink is not displayed. [Fiery] Button The [Home1] screen appears when you press the [Home] key in the operation panel.
For more information, see the user's guide for the Touch [Delete]. Perfect Binder. The [Confirm] screen is displayed. Favorite Shortcuts Touch [OK]. You can register up to nine shortcuts to your personal [Favorites] registered for each mode. ComColor GL Series User's Guide...
The setting details can be confirmed with the icons that are displayed. The image of the original is shown on the left while the image of the finishing is shown on the right. [Copies] Enter or check the number of copies here. ComColor GL Series User's Guide...
Page 37
Select a function that can be used in Scan mode. Buttons Setting Buttons Use these buttons to scroll through the list. Use these buttons to enter [Document Name] as well as to set up scanner functions. Touch [More Menu] to display other setting buttons. ComColor GL Series User's Guide...
Page 38
The following settings are available for selected [Load], which enables printing of documents saved documents: in a folder. • Details • Rename • Delete Documents List The documents saved in the selected folder are displayed in a list. ComColor GL Series User's Guide...
Page 39
You can save up to 1,000 files in one folder. The number of selected documents is displayed here. Sub Menu The following settings are available for selected documents: • Details • Change Setting • Rename • Delete ComColor GL Series User's Guide...
Page 40
Save Document Screen in [USB] - View Screen in [USB] - [Save] [Save] Icon display Function buttons Select a function that can be used in USB mode. ComColor GL Series User's Guide...
Page 41
Select a function that can be used in USB mode. The setting details can be confirmed with the icons View that are displayed. The folders and documents saved on a USB flash drive are displayed in a list. ComColor GL Series User's Guide...
Page 42
Deletes the selected documents or displays the detailed information and the total amount of the selected documents. [Close] Button Closes the screen and disconnects the connection with external systems. [Selected] The number of selected documents is displayed here. ComColor GL Series User's Guide...
Page 43
[Status / Options] Button Touch this button to display information on the connected optional equipment and its status. User Info Screen This screen displays the user name and groups of the user logged in. ComColor GL Series User's Guide...
You can also scroll through scrollable screens and lists with the drag operation by sliding your finger to the left/right or top/bottom without lifting your finger from the touch panel. Remove your finger from the touch panel to stop the scrolling. ComColor GL Series User's Guide...
Page 45
To switch the area, touch the area that you want to enter text in. Colors of Setting Buttons When a setting is changed, the setting button turns color to indicate that the setting has been changed from the default value. ComColor GL Series User's Guide...
When using the feed tray, you do not need to set the standard tray. the operation panel. • With the RISO Console, you can check the status of the machine on your computer. (p.156 "Overview of the RISO Console") Check that the [Power] key is off, then turn off the main power switch.
When you are successfully logged in, the screen you were in when you pressed the [Login/Logout] key appears again. Your user name is displayed at the bottom left of the screen. ComColor GL Series User's Guide...
Pull a tray out, toward the front. stopper against the edge of the paper. Hold the lever of the paper feed guide, and pull it forward to spread the paper feed guide until it stops. ComColor GL Series User's Guide...
Page 49
Selection") machine first. Loading the Paper in the Standard Tray Open the standard tray until it stops. • The [Rotation] feature is useful for printing on envelopes from a computer. ComColor GL Series User's Guide...
Page 50
" (CARD)". On the operation panel, check the tray settings. When you have switched to a different type or size of paper, update the feed tray settings. (p.61 "Paper Selection") ComColor GL Series User's Guide...
Page 51
Make sure that the power is on when you perform this operation. Remove the loaded paper. The standard tray starts lowering. Close the standard tray. • Make sure the standard tray is all the way down before closing it. ComColor GL Series User's Guide...
• If you do not want to restart the computer "Install.exe" file on the DVD-ROM. now, remove the check mark from the [Restart now] check box before clicking [Finish]. ComColor GL Series User's Guide...
Keep the DVD-ROM in a safe place for future reference. Uninstalling For Windows 11 and Windows Server 2022 Click [Start] - [All apps] - [RISO ComColor-GL] - [Uninstaller]. Follow the displayed instructions for uninstallation. After the printer driver has been uninstalled, restart the computer. ...
To cancel a job, select the job that you want to cancel and either touch [Cancel] or press the [Stop] key. To cancel a job with a PIN code, you need to enter the PIN code. ComColor GL Series User's Guide...
Job with a PIN code Broken job • Touch the sub menu to check the details of a job, print the job again, or delete the job. • can be touched to scroll through the list. ComColor GL Series User's Guide...
Specify the number of copies using the numeric keys. Press the [Start] key. Copy Settings p.61 This section explains each copy setting in detail. Copy Mode Function Buttons p.81 This section explains the functions available in the copy mode. ComColor GL Series User's Guide...
Slide the original guides to match screen. the width of the originals. Change the settings. Specify the detailed settings for copying. For more information on the functions that can be configured, see "List of Settings" (p.59). ComColor GL Series User's Guide...
Page 59
Press [Close] on the [Copying] screen. Load the next original and press the [Start] key. A message appears, and the original is copied as the next job. ComColor GL Series User's Guide...
Page 60
The copy job is resumed with the changed settings (p.242) in the "Appendix". applied. Touch [Close]. Performing Maintenance Touch [Continue]. During Copying The copy job is resumed with the adjustment applied. Press the [Stop] key. The [Suspending] screen is displayed. ComColor GL Series User's Guide...
Base Color Level Make the background color (base color) lighter so that the text is easier to read. p.72 Image Position Adjust the print position. p.73 Overlay Make copies upon layering an image that has been saved on the storage. p.73 ComColor GL Series User's Guide...
Page 62
Make one copy and stop copying to check the printing result before making a large Sample Copy p.81 number of copies. Check Setting Check the current settings. p.82 Custom Menu Register favorites and default settings, and edit the button order. p.82 ComColor GL Series User's Guide...
Select the color mode. Paper tray selection When using a paper size that is different from the Touch [OK]. original size, or to use a tray with [Auto Selection] not set to [ON], select a paper tray. ComColor GL Series User's Guide...
Page 64
[Manual] or envelopes, select [OFF]. Specify a non-standard paper size that is not registered. ComColor GL Series User's Guide...
"Adding or Switching touch [ ] or [ ] on the [Manual] screen to enter the Paper in the Standard Tray" (p.48). values. You can also enter the number using the numeric keys. ComColor GL Series User's Guide...
Select the sorting type. [Duplex -> Simplex] The scanned data of the two sides are copied onto Touch [OK]. a single side of two separate sheets of paper. [Paging Direction] Specify whether pages are opened right/left or top/bottom. ComColor GL Series User's Guide...
The maximum number of sheets that can be loaded at one time in the ADF is 200 sheets (with a paperweight of 80 g/m (21-lb bond)). • Scan all originals using the ADF, and do not use the platen glass. ComColor GL Series User's Guide...
Select one of the following: [Left Only], [Both Sides], or [Right Only]. Touch [Scan]. The scanning of the original starts. Repeat steps 6 and 7 until all pages are scanned. Touch [Scanned]. The printing of the scanned data starts. ComColor GL Series User's Guide...
[Top Side Up] or [Top Side Left]. Types of paper that can be used to create booklets Specify the number of pages per A3, B4, A4, B5, Ledger, Legal, Letter, Foolscap, and custom size sheet. Select a layout. Touch [OK]. ComColor GL Series User's Guide...
Select the type of stamps to be stamped. Touch [Page]. [Print Position] Specify the stamping position. If [OFF] is selected, the stamp cannot be printed. Configure the print position. [Text Size] Specify the text size for printing. ComColor GL Series User's Guide...
Page 72
] to specify the size. You can also touch the text box for [Text Size] and enter a size by using the number pad. Touch [OK]. Set the transparency option. Set the apply page option. ComColor GL Series User's Guide...
The [Original Type] screen is displayed. Select this when the original has photos. The original is printed at a speed lower than when selecting [Standard (300x300 dpi)], but it is Select the original type. scanned with higher resolution. ComColor GL Series User's Guide...
[Output Image] displays a preview of the image with the adjusted color balance. [Auto] The density of the background color is set Touch [OK]. automatically. Touch [Base Color Level]. The [Base Color Level] screen is displayed. ComColor GL Series User's Guide...
Make copies upon layering an image that has been saved on the storage. • [Overlay] cannot be used together with the following functions: Reproduction Size (p.61) Mixed Size Original (p.65) Combine (p.68) Image Repeat (p.68) ComColor GL Series User's Guide...
[Sets] Specify how many sets you need to copy based on the number of copies entered in [Copies] as one set. You can configure up to 99 sets. ComColor GL Series User's Guide...
Page 77
[OFF]: Slip sheets are not inserted. When this option is set to [Between Sets], a slip sheet is inserted between each set. When this option is set to [Between Groups], a slip sheet is inserted between each group. ComColor GL Series User's Guide...
Page 78
Follow the on-screen instructions to change the settings. You can call a saved program. Touch [Edit]. Touch [Program]. For specific instructions on subsequent operations, see steps 3 through 8 in "Saving a Program" (p.75). The [Program] screen is displayed. ComColor GL Series User's Guide...
The side in which the paper is loaded varies depending on the tray. [Front Cover] Standard tray / Optional additional tray: Load the paper with the first page facing Feed tray: Load the paper with the first page facing down. ComColor GL Series User's Guide...
When using the multifunction finisher (p.216 "Offset Output ([Separation])") For more information, see the following: • When using the face down finisher (p.184 "Staple") • When using the multifunction finisher (p.216 "Staple / Punch") ComColor GL Series User's Guide...
[Auto Image Rotation] cannot be used together face down. with [Overlay]. (p.73 "Overlay") For more information, see the following: • When using the stacking tray (p.195 "Face Up/Down") • When using the high capacity stacker (p.203 "Face Up/Down") ComColor GL Series User's Guide...
Scanning of the original starts, and when it is completed, the [Confirm] screen is displayed. Repeat steps 5 to 7 as needed. If you do not have to change the settings, follow the displayed messages for operation. ComColor GL Series User's Guide...
• The copying can be paused with the [Stop] key. (p.57 "Canceling Copying") This function prints out a copy of the original that was copied last. The original does not need to be scanned again. ComColor GL Series User's Guide...
30 favorites. Perform the operation while the details you wish to Touch [Favorites Create/Edit]. register are configured. Touch [Edit]. Touch [Custom Menu]. The [Edit Favorites] screen is displayed. The [Custom Menu] screen is displayed. ComColor GL Series User's Guide...
Page 85
The [Initialize] screen is displayed. displayed. Touch [OK]. Touch [OK]. The default values are cleared. Touch [Close]. Touch [Close]. • The administrator privilege is required in order to clear a common default value. Contact your administrator for details. ComColor GL Series User's Guide...
Page 86
Touch [Up] or [Down] to set up the order. Touch [OK]. The arrangement of the setting buttons is completed. Touch [Close]. • The administrator privilege is required in order to configure the common button order. Contact your administrator for details. ComColor GL Series User's Guide...
Change the settings. Check the preview display. Press the [Start] key. Scan Settings p.90 This section explains each scan setting in detail. Scan Mode Function Buttons p.95 This section explains the functions available in the Scan mode. ComColor GL Series User's Guide...
Select [Mail], [PC], or [Console]. Slide the original guides to match the width of the originals. Specify an address or destination. If you select [Mail] or [PC], specify the address/destination for the scanned data. ComColor GL Series User's Guide...
Page 89
For more information on the functions that can be to remove and touch [Clear]. configured, see "List of Settings" (p.89). • Touch [Sender] to display the [Sender] screen and enter the sender's name. Check the preview display. ComColor GL Series User's Guide...
Page 90
SSD of the machine. The saved data can be downloaded to a user's computer using the RISO Console. See "[Scan] Menu Screen" (p.162) in "RISO Console". • The storage period for the scanned data is configured by the administrator.
Preview before Scan and display the original before sending or saving. p.95 sending Register favorites and default settings, and edit the button order. You can register Custom Menu p.96 and edit the address books as well. ComColor GL Series User's Guide...
[Add Owner Name] determined that the original is in black and white, it Specify whether to add the owner's name to the is converted to black data and saved. document names set up in [Input Method]. ComColor GL Series User's Guide...
• [Image Quality] • [Duplex/Simplex] and [Book Shadow Erasure] [Image Quality] cannot be used together. (p.92 "Book Shadow [1: Low], [2], [3], [4], [5: High] Erasure") [PDF Password] Set the user password and owner password. ComColor GL Series User's Guide...
[200 dpi], [300 dpi], [400 dpi], [600 dpi] (p.66) in "Copying". • [Book Shadow Erasure] and [Duplex/Simplex] Touch [Resolution]. cannot be used together. (p.91 The [Resolution] screen is displayed. "Duplex/Simplex") Specify the resolution. Touch [OK]. ComColor GL Series User's Guide...
Assign PIN codes when saving scanned jobs on cannot be corrected for C-R, M-G, or Y-B. the internal SSD of the machine. The PIN code set (p.90 "Color Mode") here is required when using the RISO Console to download to a computer. [OFF], [ON] Image Control Enter value (up to 8 characters) Touch [PIN code].
Touch [ON]. Touch [OK]. Load the original and press the [Start] key. Scanning of the original starts, and when it is completed, the [Confirm] screen is displayed. Touch [Change Setting]. The scan setting screen is displayed. ComColor GL Series User's Guide...
Touch [Check Setting]. The [Check Setting] screen is displayed. Check the current settings. The following setting can be configured from the sub menu: • Add to Favorites • Save as Default • Setting Confirmation Print Touch [Back]. ComColor GL Series User's Guide...
"Administrator's Guide". Editing the Address Book You can edit the personal addresses and destinations registered in the address books. When you have selected [Mail] Touch [Custom Menu]. The [Custom Menu] screen is displayed. ComColor GL Series User's Guide...
Page 99
The [Custom Menu] screen is displayed. Touch [Address Book Add/Edit]. The [Edit Address Book] screen is displayed. Select an address and touch [Delete]. The [Confirm] screen is displayed. Touch [OK]. The address is deleted from the address book. Touch [Close]. ComColor GL Series User's Guide...
Press the [Start] key. Click [Print] or [OK]. Printer Driver Settings p.107 This section explains each printer driver setting in detail. Print Mode Function Buttons p.131 This section explains the functions available in Print mode. ComColor GL Series User's Guide...
The print dialog box is displayed. • If the [Collate] check box in the print dialog box is selected, remove the check mark. To print by collating copies, set [Sort] in the [Basic] tab to [Collated]. ComColor GL Series User's Guide...
Page 103
When printing a job with a PIN Touch [Continue]. code The print job is resumed with the changed settings The PIN code entry screen is displayed. Enter the applied. PIN code using the numeric keys, and touch [Continue]. ComColor GL Series User's Guide...
Page 104
[Paper Guide Control]. For more information, see "Maintenance" (p.242) in the "Appendix". Touch [Close]. Touch [Continue]. The print job is resumed with the adjustment applied. ComColor GL Series User's Guide...
If the values are not registered, all the settings are restored to their default values. (p.107 "Restore user settings") • When optional equipment is connected, first configure the settings in [Printer Configuration] under the [Environment] tab to use certain functions. The unavailable functions are grayed out. (p.127 "[Environment] Tab") ComColor GL Series User's Guide...
Specify the background watermark to be added to document pages. p.115 Stamp Stamp the page number, date, or text in the header or footer. p.116 Image Position Specify this when adjusting the print position. p.117 Rotation Specify the print orientation. p.117 ComColor GL Series User's Guide...
Page 107
Use this function to adjust the lightness, chroma, contrast, and gamma value of red, p.122 Correction green, and blue. Barcode Area Specify the barcode area to make the barcode suitable for reading. p.122 Definition Envelope Imaging Specify the image processing for envelope printing. p.124 ComColor GL Series User's Guide...
Page 108
Change Setting Use this option to change job settings. p.131 External System It appears when [External System Link] is set up by the administrator. You can print or p.132 Link delete jobs, or check amounts. ComColor GL Series User's Guide...
[Preferences] are temporary settings, Click [Add to Favorites]. which are specified by selecting the print option in the application on the computer. The [Add to Favorites] dialog box is displayed. The settings are not saved. ComColor GL Series User's Guide...
Select this option to print in one color (cyan) cannot enter the number of copies. regardless of the colors used in the document. [Magenta] Select this option to print in one color (magenta) regardless of the colors used in the document. ComColor GL Series User's Guide...
Page 111
Select the [Mixed Size Original] check box and Specifying a Custom Size click [Details] to display the [Mixed Size Original] dialog box. Select the binding position for each When the document is a non-standard size, select size. [Custom]. ComColor GL Series User's Guide...
Page 112
[Paper Type]. (p.111 "Paper Type") • The list shows the sizes registered in [Custom • You can use the RISO Console to confirm the Paper Entry] in the [Environment] tab. (p.128 paper size and paper type loaded in the printer "Custom Paper Entry") paper tray.
Page 113
• This machine uses color profiles created and edited based on the ColorSet technology licensed from Monotype Imaging K.K. ComColor GL Series User's Guide...
You can change the display order for the favorites in [List] using these keys. [Rename] You can change the registered name of a favorite. Enter a new name with 1 to 20 characters. [Delete] You can delete a favorite. ComColor GL Series User's Guide...
[8 Pages: Left Top to Right], [8 Pages: Left Top to Bottom], [8 Pages: Right Top to Left], [8 Pages: Right Top to Bottom] Select the number of pages per sheet and the order in which they are laid out. ComColor GL Series User's Guide...
Page 116
[OFF], [2 Pages], [4 Pages], [8 Pages] Select the number of pages per sheet. Example: If [4 Pages] is selected Booklet Continuous multiple pages are imposed and printed to create a middle-binding booklet after duplex printing. ComColor GL Series User's Guide...
Page 117
The image quality may be rough-grained when enlarging the image data. Be sure to select [Fine] for [Image Quality] and [High] for [Line Smoothing]. For more information, see "Image Quality" (p.121) and "Line Smoothing" (p.121). ComColor GL Series User's Guide...
Page 118
Date To print the date stamp, select [ON] on the [Date] tab screen. [Top Left], [Top Center], [Top Right], [Bottom Left], [Bottom Center], [Bottom Right] Select the date stamping position. ComColor GL Series User's Guide...
Page 119
Select a font and style. orientation of the paper loaded in the tray, and [Size] other settings. Specify the size of the text for the text stamp. ComColor GL Series User's Guide...
Fold allow for the original-scale printed image to fit into the paper. When using the optional multifunction finisher, you can configure how the paper is folded. For more information, see "Fold" (p.210) in "Optional Equipment". ComColor GL Series User's Guide...
Page 121
[Standard Tray]. [Select Front Cover Tray], [Select Back Cover • [Additional Tray] is displayed when using the Tray] optional additional tray. [Standard Tray], [Feed Tray 1], [Feed Tray 2], [Feed Tray 3], [Additional Tray] ComColor GL Series User's Guide...
This option processes text with sharp rendering • When using the multifunction finisher (p.214 and image data with more natural colors. "Output Tray Relay") [Text/Illustration] This option processes text with sharp rendering and illustrations with vivid colors. ComColor GL Series User's Guide...
Page 123
When less ink is used, print density is reduced and the neutral colors become uneven. • Printing will take longer if you select [Fine]. • [Envelope Imaging] cannot be configured when [Draft] is set. (p.124 "Envelope Imaging") ComColor GL Series User's Guide...
Page 124
1 mm (3/64") margin around the barcode. • [Gamma Correction] and [Blank Page Detection] cannot be used together. (p.126 "Blank Page Detection") ComColor GL Series User's Guide...
Page 125
• The type of targeted barcodes is one- dimensional. If the barcodes are two- dimensional (e.g., QR code), you do not need to perform this setting. ComColor GL Series User's Guide...
How to Register to the Default Select the printer that you use from [Start] - [Settings] - [Devices] or [Bluetooth & devices] - [Printers & scanners]. ComColor GL Series User's Guide...
Page 127
[Job Name] check box to enter the job name. You can enter a comment for printer users. You can display job comments using the operation panel of the printer or the RISO Console. PIN Code Program You can set a PIN code when printing a document you do not want others to view.
Page 128
[Uncollated], [Collated] machine when printing jobs. Slip Sheet (Program) Blank Page Detection Insert a slip sheet to separate printouts into specified units. The print data is printed excluding the blank pages. ComColor GL Series User's Guide...
When using the printer driver for the first time or Name], the community name for SNMP adding optional equipment to the machine, you communication will be set to "public". must configure the environment settings on the [Environment] tab under printer properties. ComColor GL Series User's Guide...
Page 130
Automatically connected. [Default Paper Type of "Any"], [External You can use this option when the paper size is System Link], and [End-User-Defined already registered in the printer. Characters (EUDC) Printing] are not configured automatically. ComColor GL Series User's Guide...
Page 131
It is useful to save settings to a computer when, for Select the paper size to delete from example, you want to share the registered paper the list box. size among multiple users or reinstall the printer driver. ComColor GL Series User's Guide...
Page 132
[Destination] on the [Basic] tab. Click [OK]. Click [OK]. Get Printer Info Obtain the information of the optional configuration of the printer and automatically configure this to the printer driver. For more information, see "Printer Configuration" (p.128). ComColor GL Series User's Guide...
When auto reset is executed (The auto reset timing is set by the administrator.) Print Density When you log out You can adjust the print density. For more information, see "Print Density" (p.65) in "Copying". ComColor GL Series User's Guide...
Touch [External System Link] on the [Home1] screen. When connected to an external system, a list of the documents saved on the external system will be displayed. Select a document and press the [Start] key. ComColor GL Series User's Guide...
Enter the number of copies Touch [Save Document] to using the numeric keys. change the settings. Press the [Start] key. Press the [Start] key. Storage Mode Function Buttons p.140 This section explains the functions available in Storage mode. ComColor GL Series User's Guide...
Align the originals and place them face up. • Open and close the original cover gently. Select [Storage] - [Save] on the [Home1] screen. Slide the original guides to match the width of the originals. ComColor GL Series User's Guide...
The list of documents shows the documents that are saved in the selected folder. The following settings can be configured from the sub menu: • Details • Change Setting • Rename • Delete • Copy to USB Drive • Copy to Folder ComColor GL Series User's Guide...
Page 138
• Documents are saved in a folder in the form of data that includes setting details. When printing these documents, use the same paper type as that used when saving the data in the folder. ComColor GL Series User's Guide...
If a PIN code is configured, you will need to enter this PIN code when printing or p.93 deleting a document. Stamp Stamp the page number, date, or text in the header or footer. p.69 ComColor GL Series User's Guide...
Page 140
Paper Tray Relay p.79 paper type when the selected tray runs out of paper. Auto Image Rotate the image 90 degrees automatically when the orientation of the original p.79 Rotation and paper do not match. ComColor GL Series User's Guide...
Adjust the print position. p.73 Decrease the printing speed. This also reduces the amount of noise produced by Slow Printing p.79 the machine when printing jobs. Check Setting Use this option to check the current settings. p.142 ComColor GL Series User's Guide...
Check the settings of the document to save. For more information, see "Check Setting" (p.82) in "Copying". Preview before saving You can scan and display the original before saving. Touch [Preview before saving]. The [Confirm] screen is displayed. ComColor GL Series User's Guide...
[OK]. ]: View as thumbnails ]: View as list Touch [OK]. • For more information on text input, see "Entering Text" (p.43). • For [Direct Input], you can use uppercase and lowercase letters. ComColor GL Series User's Guide...
Page 144
[OK]. For more information on the settings buttons, see "List of Settings in [Storage] - [Load]" (p.139). Back Touch this button to display the folder/document list screen. ComColor GL Series User's Guide...
Page 145
Only the folders which can be used by the logged in user are displayed in the [Copy to Folder] screen. • Select a folder and touch [Open] to confirm a list of the documents inside the folder. ComColor GL Series User's Guide...
Enter the number of copies Touch [Save Document] to using the numeric keys. change the settings. Press the [Start] key. Press the [Start] key. USB Mode Function Buttons p.151 This section explains the functions available in USB mode. ComColor GL Series User's Guide...
"Originals" (p.22). In the ADF Load the original in the ADF. Close the original cover. Align the originals and place them face up. • Open and close the original cover gently. ComColor GL Series User's Guide...
For files in the PRN format (p.150 "List of Settings in [USB] - [Load]") Insert a USB flash drive into the For files in the PDF format (p.236 "List of Settings in [USB] - [Load]") USB slot. ComColor GL Series User's Guide...
Page 150
Chapter 5 USB Enter the number of copies using the numeric keys. Press the [Start] key. ComColor GL Series User's Guide...
Call frequently used settings. p.151 Check Setting Check the current settings. p.151 Preview before Scan and display the original before saving. p.151 saving Custom Menu Register favorites and default settings, and edit the button order. p.151 ComColor GL Series User's Guide...
If the optional PS kit is installed, PDF files saved on a USB flash drive can also be used. In this case, you can change the settings for printing PDF files. For more information, see "Printable Files in the USB Flash Drive" (p.234) in "Optional Equipment". ComColor GL Series User's Guide...
You can register favorites and default settings, and For more information on the settings that can be edit the button order. configured, see "List of Settings in [USB] - [Save]" For more information, see "Custom Menu" (p.82) in (p.149). "Copying". ComColor GL Series User's Guide...
The following settings can be configured from the • Touch categories such as [Name] or [Doc.] to switch the sorting order between ascending sub menu: and descending for display in the list. • Setting Confirmation Print Up One Displays one higher tier. ComColor GL Series User's Guide...
Page 155
Only the files which can be used by the logged in user are displayed in the [Copy to Folder] screen. • Select a folder and touch [Open] to confirm a list of the documents inside the folder. ComColor GL Series User's Guide...
RISO Console The RISO Console is software that uses a Web browser to remotely control this machine. With a computer connected to the printer via a network, you can check the printer status, change the settings of a job, and perform other operations.
The information and the functions that are • Make sure the machine is connected to the network. available on the side menu of the RISO Console are as listed below. System Info View the status of the consumables, such as Consumables p.159...
RISO Console. output via [Form] from Form Data p.234 • If the RISO Console is not operated for 5 the printer driver. (When minutes or more, it will disconnect the the optional PS kit is connection with the printer. To reconnect...
Title bar (list display only) You can sort jobs by clicking an item in the title bar ([Document Name], [Owner], [Pages], or [Date and Time Saved]). Select All Select this option if you want to select all jobs. ComColor GL Series User's Guide...
• The remaining amount of ink is indicated based on the bottle capacity. • If you are not using RISO ink, the remaining amount of ink is not displayed. Paper Status The estimated remaining amount of paper, paper size, paper type, thickness, and whether [Auto Machine Status Selection] is [ON] are all displayed for each tray.
Page 162
[Download as CSV File] Click this button to save the latest information to a computer as a CSV file. [Service Count] The total number of times of paper transport when printing and copying is displayed. ComColor GL Series User's Guide...
Enter the new password in [New Password]. Your password should consist of 0 to 16 characters (numerals and/or lowercase letters). The entered characters are displayed with asterisks (*). Enter the new password again for confirmation. ComColor GL Series User's Guide...
You can view the settings, file capacity, and other information on the selected job. • The storage period for scanned jobs is configured by the administrator with [Scan Document Save Setting]. When that period is reached, the job is deleted automatically. ComColor GL Series User's Guide...
When user login is not required • In the following cases, the job name is displayed as "*****": Jobs with the [Hide Job Name] check box selected on the printer driver (p.125 "PIN Code") ComColor GL Series User's Guide...
You can enter 1 to 128 characters for the folder • Delete name. • Copy to Folder • The functions may not be available, depending • Details on how the administrator has configured the • Download settings. ComColor GL Series User's Guide...
The storage period for jobs is configured by the administrator. • An icon indicating the job type is displayed on the left side of the job name. For more information, see "[Finished] Screen" (p.53) in "About Jobs". ComColor GL Series User's Guide...
The screen is displayed to indicate that the settings are sent. Click [OK]. Glue Temperature Preheats the glue unit when using the optional Perfect Binder. For more information, see the user's guide for the Perfect Binder. ComColor GL Series User's Guide...
Installing the Barcode Area Definition Software Creating and Registering a Barcode Area Definition File p.171 Create a PRN file. Read the PRN file. Specify the barcode area. Save the barcode area definition file. Register the barcode area definition file. ComColor GL Series User's Guide...
Open the [Utility] - [BarcodeAreaDefinitionSoftware] After the Barcode Area Definition folder on the DVD-ROM, and double- Software has been uninstalled, click the "setup.exe" file. restart the computer. Select the desired language in the pull-down menu and click [OK]. ComColor GL Series User's Guide...
When the same icon appears in both the tool Click [Start] - ([All apps] -) [RISO] - bar and the menu bar, you can click either one to [Barcode Area Definition Software].
Page 172
Creation Tool suitable for reading. The enclosed area is indicated Automatically detects the Auto Area barcode area on all pages or Detection specified pages. More Version Displays the version information. ComColor GL Series User's Guide...
Barcode Area Definition Software, specify the download documents saved in barcode area, and create a CSV file. The administrator uses the RISO Console to the folder. register the barcode area definition file to the Start the RISO Console, select the saved printer.
Page 174
To edit the barcode area, use the edit tool and menu bar. (p.169 "Operations") If automatic barcode area detection was used, make sure that the barcode was detected properly. If the detected area is not aligned with the barcode, (selection tool) to adjust the position. ComColor GL Series User's Guide...
Page 175
Example of when barcode processing is not performed correctly, because the original is rotated and the position of the barcode relative to the base point is changed ComColor GL Series User's Guide...
Page 176
Register the barcode area definition file. Register the barcode area definition file to the printer in the administrator menu on the RISO Console. For more information, see the "Administrator's Guide". ComColor GL Series User's Guide...
You can select a registered barcode area definition file from the [Barcode Area Definition] pull-down menu in the [Image] tab on the printer driver screen. Select a suitable barcode area definition file when printing a barcode original. (p.124 "Barcode printing barcode originals") ComColor GL Series User's Guide...
This section describes the settings and functions that are available when the multifunction finisher is connected. PS Kit p.220 This section describes the settings and functions that are available when the PS kit is installed. ComColor GL Series User's Guide...
Open this cover if a staple is jammed, or to replace the staple cartridge. Face Down Finisher Socket Connect the face down finisher power cord. Position [ ] and [ Align [ ] and [ apart from each other. ComColor GL Series User's Guide...
Location of the Caution Label The location of the caution label (warning) is shown below. Label Details Your fingers may become caught while the face down finisher moves or when you remove printouts from the stacking tray. ComColor GL Series User's Guide...
(such as Program p.74 corporate division or class). Stack sets of printed Offset documents slightly apart Output p.183 from one another to ([Program]) create separation. Specify where to insert Separation slip sheets between p.77 printouts. ComColor GL Series User's Guide...
Page 183
• When the printing job exceeds the maximum number of sheets that can be stapled, a confirmation screen is displayed so that you can select whether to stop printing or continue printing without stapling. ComColor GL Series User's Guide...
Page 184
• When multiple different original sizes are used in the original, the machine automatically rotates the image to suit the [Binding Edge] setting. ComColor GL Series User's Guide...
<Paper that can be offset> 131 mm × 148 mm - 305 mm × 550 mm (5 3/16" × 5 27/32" - 12" × 21 5/8") Touch [Separation]. Select the offset output setting. Touch [OK]. ComColor GL Series User's Guide...
Page 186
• If part of the printing area is missing due to the Binding Edge binding margin setting, set [Auto Reduction] to [ON]. Select the binding edge of the paper. Left, Right, Top Touch [OK]. ComColor GL Series User's Guide...
If a paper jam occurs, open this cover to remove the Load the paper. jammed sheet. Loading the Paper • When changing the paper size (paper guide position), contact your dealer or authorized service representative. Pull a tray out, toward the front. ComColor GL Series User's Guide...
Page 188
Chapter 8 Optional Equipment Push the paper guide back until it is aligned against the outside edge of paper. Push the tray back into the machine. ComColor GL Series User's Guide...
Envelope Guide Angle Adjustment Lever Use this lever to adjust the angle of inclination of the envelope guide. The angle of the envelope guide can be adjusted to four levels. ComColor GL Series User's Guide...
Be sure to load envelopes with their flaps the guides in position. open and their bottom side entering the machine first. The adjustment of the angle of inclination of the envelope guide is configured using the envelope guide angle adjustment lever. ComColor GL Series User's Guide...
Page 191
When the size of the paper is less than A4 vertically or more than A3, or when using envelopes of the C5 or DL-LEF size, remove the standard tray padding cover. The paper feed guide cannot be moved while the cover is in place. ComColor GL Series User's Guide...
When the machine is idle and there is paper in the stacking tray, the paper guides spread apart, making it easy to remove the paper. The administrator can configure which paper guides spread apart when the button is pressed. ComColor GL Series User's Guide...
Location of the Caution Label The location of the caution label (warning) is shown below. Label Details Your fingers may become caught when opening or closing the stacking tray. ComColor GL Series User's Guide...
Fold all paper guides when printing on paper larger than 320 mm × 432 mm (12 19/32" × 17"). Adjust the paper arranger. Normally, the paper arranger should be extended when printing on paper that is B4 size or smaller. ComColor GL Series User's Guide...
Printer Driver Setting item Use this item to: [Finishing] Tab Select the output tray for Output Tray p.195 printouts. Switch the output tray Output Tray automatically when the p.195 Relay output tray becomes full. ComColor GL Series User's Guide...
Touch [ON]. • This setting is not available when using the wide stacking tray. Touch [OK]. • When [Output Tray Relay] is configured, [Sort] is set to [Uncollated] in the [Basic] tab. (p.109 "Sort") ComColor GL Series User's Guide...
Cover] cannot be used at the same time. (p.68 "Booklet", p.77 "Add Cover") Maintenance Mode Settings Paper Guide Control Adjust the position of the paper guides of the auto- control stacking tray. For more information, see "Paper Guide Control" (p.242) in the "Appendix". ComColor GL Series User's Guide...
You cannot print with the cover open. Corrugators • Be sure to use the dedicated carriage with the high capacity stacker. Set the corrugators to feed paper smoothly according to the paper type and align printouts to stack neatly. ComColor GL Series User's Guide...
• When removing only the printouts Printouts can be removed without pulling out the dedicated carriage. You can remove printouts without waiting for the stacking tray to lower to the bottom. ComColor GL Series User's Guide...
Page 201
Open the right cover of the high capacity stacker. Close the right cover of the high capacity stacker. ComColor GL Series User's Guide...
In such case, close the right cover, press the stacking tray descent button, and lower the stacking tray to the carriage. This will allow you to pull out the entire carriage and remove the paper. ComColor GL Series User's Guide...
[Finishing] tab, make sure • This setting is not available for paper sizes that [Printer Configuration] on the that cannot be output to the high capacity [Environment] tab has been configured stacker. correctly. (p.128 "Printer Configuration") ComColor GL Series User's Guide...
<Paper sizes that can be offset> [OFF] • A3, B4, A4, A4-LEF, B5, B5-LEF, Ledger, Offset output is not performed. Legal, Letter, Letter-LEF, Foolscap, Specified Size (length of paper between 182 mm (7 3/16") to 432 mm (17")) ComColor GL Series User's Guide...
Specify whether to stack the pages face up or face down in the stacker. [Face Up], [Face Down] Output Tray Relay The output tray switches automatically when the tray that is being used becomes full. Touch [Output Tray Relay]. Touch [ON]. Touch [OK]. ComColor GL Series User's Guide...
Booklet Tray Transfer paper from the printer to the multifunction Booklets and bi-folded printouts will be output here. finisher. Right Cover Open this cover when replacing the staple cartridge or when a paper jam has occurred. ComColor GL Series User's Guide...
Page 207
Use to connect the multifunction finisher power cord. Folder Unit Power Distribution Socket Use to connect the folder unit power cord. Transfer Unit Socket Use to connect the transfer unit power cord. Not equipped depending on the multifunction finisher you ComColor GL Series User's Guide...
Label Details Your fingers may become caught while the multifunction finisher moves or when you remove printouts from the stacking tray. The location of the label may be high temperature. Contact may result in burn. ComColor GL Series User's Guide...
(p.128 "Printer Switch the output tray Output Tray Configuration") automatically when the p.219 Relay output tray becomes full. • The punch settings are displayed when you are using the optional punch unit. ComColor GL Series User's Guide...
[OFF], [Left 1 Staple], [Right 1 Staple], • When a job exceeding the maximum number [2 Staples] of sheets that can be stapled is printed, the printouts will be output without being stapled. ComColor GL Series User's Guide...
Page 211
• When multiple different original sizes are used in the original, the machine automatically rotates the image to suit the [Binding Edge] setting. ComColor GL Series User's Guide...
Page 212
Binding]. (p.114 "Booklet", p.115 "Poster", with mixed. p.127 "Multi-part Paper Printing", p.212 "Booklet Binding") Select the type of fold and click [Details] to display the [Fold] dialog box. Configure the folding direction and binding edge. ComColor GL Series User's Guide...
Page 213
(When the A4 original is vertical and the A3 original is horizontal, select [Landscape]) (p.109 "Original Size", p.109 "Mixed Size Original") • For [Paper Size], specify the size of the paper subject to the Z-fold. (p.110 "Paper Size") ComColor GL Series User's Guide...
Page 214
Foolscap, 8K, 16K, Custom size • You cannot use the paper which has a width longer than its height. [OFF] Booklet binding will not be configured. [Fold] The printing paper will be folded in two. ComColor GL Series User's Guide...
Page 215
In this case, specify the cover for booklet binding. feed tray that is loaded with printed cover paper. [Cover Sheet Tray] [Standard Tray], [Feed Tray 1], [Feed Tray 2], [Feed Tray 3] ComColor GL Series User's Guide...
Page 216
Each set of printed documents is stacked slightly Finished print jobs are stacked slightly apart from apart from one another. one another. [Between Groups] Groups of printed documents are stacked slightly apart from one another. ComColor GL Series User's Guide...
When [OFF] has been selected, the sheets are not stapled even if [Fold + Staple] is selected. [ON] Data is imposed to create a book by folding, layering, and then binding the sheets (on the side). ComColor GL Series User's Guide...
Page 220
Touch [OK]. Fold Fold Direction [Z-fold] [Bi-fold] Touch [Fold]. Touch [Z-fold]. [Inner Tri-fold] Select [Binding Edge]. When the original sizes are mixed, select [Mixed Size Z-fold]. [Outer Tri-fold] ComColor GL Series User's Guide...
Page 221
[Binding] or [Fold] of [Booklet]. (p.215 "Binding ([Booklet])", p.217 "Fold") Output Tray Relay The output tray switches automatically when the tray that is being used becomes full. Touch [Output Tray Relay]. Touch [ON]. Touch [OK]. ComColor GL Series User's Guide...
• Keep the DVD-ROM in a safe place for installation wizard does not start up, double-click the future reference. "Install.exe" file on the DVD-ROM. Select the desired language in the pull-down menu and click [OK]. ComColor GL Series User's Guide...
[Password] information. For Windows 11 and Windows Click [Close]. Server 2022 Click [Start] - [All apps] - [RISO ComColor-GL PS] - Remove the DVD-ROM from the [Uninstaller]. Follow the displayed instructions for computer. uninstallation. After the printer driver has been uninstalled, restart the computer.
Page 224
[Utility] tab. printer configuration. On the [Printers & Scanners] screen, select ComColor GL (printer name), then click [Open Print Queue]. The [Utility] screen is displayed. ComColor GL Series User's Guide...
Page 225
If you try to print in a network environment where Wake On LAN communication is not enabled, the printer does not wake up automatically. The MAC address of the machine is displayed in [MAC Address of the Printer]. ComColor GL Series User's Guide...
Page 226
Click [OK]. • Delete the following folder and file from the macOS startup volume as needed: The [RISO] folder in [Library] - [Printers]. "RSGL****.ppd" file within [Library] - [Printers] - [PPDs] - [Contents] - [Resources] ComColor GL Series User's Guide...
Click [Print] to perform printing. • Keep the DVD-ROM in a safe place for future reference. Uninstalling the PPD File Open the screen for registering a printer. Select the printer icon and delete it. ComColor GL Series User's Guide...
When optional equipment is connected, first configure the settings in [Printer Configuration] under the [Environment] tab to use certain functions. • When printing from a macOS, use the standard OS settings for [Copies], [Original Size], and [Orientation]. ComColor GL Series User's Guide...
[Favorites] Tab text box will turn red, and the range of valid numbers will be displayed in red. Enter the valid number. For more information on each setting item, see "[Favorites] Tab" (p.112) in "Printing". ComColor GL Series User's Guide...
20 sheets when this is set to [Fold + Staple]. Stacking Tray)" (p.191): [Output Tray], [Output Tray Relay] • For more information on the following function when using the high capacity stacker, see "High Capacity Stacker" (p.197): [Offset Output], [Output Tray], [Output Tray Relay] ComColor GL Series User's Guide...
The • This method is most suitable for graphics such larger the value, the higher the contrast. as charts and graphs, in which bright saturated Specify a value between -2 and +2. colors are important. ComColor GL Series User's Guide...
[Details] to display the [Form Overlay] dialog box. • When [Max Drops] is set to [Auto], the number Configure the settings for overlaying the form. of drops is automatically configured based on the paper type. Normally, use [Auto]. ComColor GL Series User's Guide...
Page 233
[Preferred Layer] When [Each Page Overlay], [Each Page + Alternating Overlay (Long Edge)], or [Each Page + Alternating Overlay (Short Edge)] is selected, specify whether to assign priority to the form or the output data. ComColor GL Series User's Guide...
Page 234
Prints the form and output data on different sides. The form data is printed on the side specified in [Print Face]. The output data is printed as variable data on the other side. The illustration is an example of long edge binding. ComColor GL Series User's Guide...
Page 235
This function is not available when [Combine] [Print Pattern], specify whether to assign priority to is configured. the form data or the output data, and overlay it on the other. [None] The output data and the form data are overlaid. ComColor GL Series User's Guide...
Displays the form data that have been sent by the machine. selecting [Form] in the [Output] setting of the RISO • The following types of files saved on a USB ComColor GL PS Printer Driver.
Page 237
PS Kit An original that contains high resolution images or a file with a file size that exceeds the maximum capacity of the machine ComColor GL Series User's Guide...
Page 238
Select the output tray for printouts. When using the optional auto-control stacking tray / wide stacking tray p.195 Output Tray When using the optional high capacity stacker p.203 When using the optional multifunction finisher p.219 ComColor GL Series User's Guide...
Page 239
When using the optional multifunction finisher p.219 Auto Image Rotate the image 90 degrees automatically when the orientation of the original and p.79 Rotation paper do not match. [Mixed Size Z-fold] under [Fold] cannot be configured. ComColor GL Series User's Guide...
Page 241
Arial Bold Palatino-Italic Arial Bold Italic Palatino-Roman Arial Italic Symbol AvantGarde-Book Symbol IPS AvantGarde-BookOblique Times New Roman AvantGarde-Demi Times New Roman Bold AvantGarde-DemiOblique Times New Roman Bold Italic Bookman-Demi Times New Roman Italic Bookman-DemiItalic Times-Bold Bookman-Light ComColor GL Series User's Guide...
You can directly print PDF documents and Univers Condensed Bold Italic photo/image data saved on a mobile device such Univers Condensed Medium as your tablet or smartphone, by using the RISO Univers Condensed Medium Italic PRINT-S application. Univers Medium In addition, you can also configure each setting...
This section describes how to replace ink cartridges. Specifications p.245 This section describes the basic specifications of the ComColor GL series and optional equipment. Consumables p.255 This section describes the specifications of ink cartridges and spare staples. Index p.256 ComColor GL Series User's Guide...
Clean the ink head when you notice a change in image quality, such as blurring in part of a copy, Adjusts the position of the paper guides when white streaking, or faded colors. using the optional auto-control stacking tray or high capacity stacker. ComColor GL Series User's Guide...
Page 245
The adjusted value will also return to 0 mm when the [Power] key on the operation panel is pressed to restart the unit, the [Reset] key is pressed, or when the paper size has been changed. Touch [Close]. ComColor GL Series User's Guide...
Page 246
Position the ink cartridge so that the ▲ mark faces upward, and insert it until it stops. Open the front cover. Close the front cover. Remove the ink cartridge identified as empty. Confirm the color of the ink cartridge. ComColor GL Series User's Guide...
Page 247
Line Smoothing: 600 dpi (main scanning direction) × 600 dpi (sub-scanning direction) Warm-up Time 2 min. 30 sec. or less (at room temperature of 23 ºC (73.4 ºF)) First Print Time 5 sec. or less (A4-LEF) ComColor GL Series User's Guide...
Page 248
Memory Capacity 4 GB Capacity 512 GB Solid State Drive Available Space Approx. 370 GB Operating System Linux Power Source AC 100 V - 240 V, 50 Hz - 60 Hz, 12.0 A - 6.0 A ComColor GL Series User's Guide...
Page 249
110 sheets/minute (ComColor GL9730/GL9730R) 95 sheets/minute (ComColor GL7430/GL7430R) LEF stands for "Long edge feed". When setting [Power Consumption (in Sleep)] to [Low] When using plain paper (64 g/m (17-lb bond)) DE-UZ219 Noise Emissions while printing ComColor GL Series User's Guide...
Page 250
Scanning Gray 10-bit input and 8-bit output for each RGB color Levels Monochrome/Color: 100 ppm Scanning Speed * RISO KAGAKU standard original (A4-LEF/Letter-LEF), 300 dpi, JPEG, PDF, when stored to main unit solid state drive. Scan Functions Network Interface Ethernet 1000BASE-T/100BASE-TX/10BASE-T...
Page 251
In use: 1,440 mm × 725 mm × 1,345 mm (56 11/16" × 28 17/32" × Dimensions When Operating (when 52 15/16") connected to main unit) (W × D × H) With cover open: 1,440 mm × 1,240 mm × 1,345 mm (56 11/16" × 48 13/16" × 52 15/16") ComColor GL Series User's Guide...
Page 252
Max. 140 W Ready : 30 W or less Power Consumption Sleep : 30 W or less Stand-by: 0.5 W or less Operating Noise Max. 68 dB (A) A4-LEF (Simplex) at the maximum print speed ComColor GL Series User's Guide...
Page 254
To use the punch function, the optional punch unit is required. Excludes the punch unit. 3.0-1.5 A when connecting to the folder unit (the folder unit: 0.7-0.4 A) 300 W when connecting to the folder unit (the folder unit: 70 W) ComColor GL Series User's Guide...
Page 255
Indoor type, pollution degree 2 , At altitudes of 2,000 m or lower * The pollution degree of the usage environment due to dirt and Safety Information dust in the air. Degree "2" corresponds to a general indoor environment. ComColor GL Series User's Guide...
Page 256
PCL: 88 Roman fonts Genuine Adobe engine RISO shall not provide any PCL printer driver. For PCL output, available functions differ from printing via PS printer driver. When you need the functions not available for PCL output, print via PS printer driver.
Page 257
Use the ink cartridge within approximately 24 months from the date of manufacture (when preserved under room temperature). For optimal printing quality, we recommend that you use the ink cartridge as soon as possible after purchase. You can find the date of manufacture on the ink cartridge. ComColor GL Series User's Guide...
Page 258
70, 116 Booklet binding 212, 228 Date/time Booklet cover Dedicated carriage Booklet tray Deleting an address or a destination Button operations of the RISO Console Destination Document name Dot process Canceling copying Double-feed check Card-IJ Downloading scanned jobs to a computer...
Page 259
Line smoothing List Load screen Gamma correction 72, 93, 122, 229 Loading orientation of the paper 182, 209 Get printer info Loading the next copy job Grayscale Loading the paper Logging into the RISO Console Login ComColor GL Series User's Guide...
Page 261
187, 189 Standard tray paper guide 28, 187 Staple 180, 184, 208, 216 Z-fold 210, 218 Staple function and loading orientation of Zoom the paper 182, 209 Start key Starting the RISO Console Stop key 068-36005-404 ComColor GL Series User's Guide...
Page 263
The purpose of the "e-waste Rule" is to reduce waste and ensure Electrical Equipment is recycled at the end of life. RISO declares our products comply with the "India E-waste Rule" and prohibits use of lead, mercury, hexavalent RISO declares our products comply with the "India E-waste Rule" and prohibits use of lead, mercury, hexavalent RISO declares our products comply with the "India E-waste Rule"...
Need help?
Do you have a question about the ComColor GL Series and is the answer not in the manual?
Questions and answers