Riso ComColor X1 series Technical Manual page 633

Test Modes
5-3-6. Data Editing (D)
Data Editing (D)
No. Process Name
5700 Test Print Resolution
5701 Test Scan Size Select
5703 Test Scan S/D Select
White Level Threshold
5706
(Red)
White Level Threshold
5707
(Green)
White Level Threshold
5708
(Blue)
5710 FB Scan Horizontal Position
5711 FB Scan Start Position
FB Scan Elongation
5712
Adjustment
5715 Scanner Lock/Unlock
Rev.1.00
Default Unit/Range
Specifi es the test resolution applied in test pattern printing, or in tests in which
the scanner is operated for one cycle or continuously, the AF unit is operated
0 continuously, or transfer by the AF unit is performed.
0: 300 dpi x 300 dpi, 1: 300 dpi x 600 dpi, 2: 600 dpi x 300 dpi, 3: 600 dpi x
600 dpi
Specifi es the scanning size applied in test pattern printing, or in tests in
which the scanner is operated for one cycle or continuously, or the AF unit is
operated continuously.
* When you select 4 (600 dpi x 1200 dpi) in 05700 (test operation resolution
setting), this setting is disregarded and A4 landscape is used.
0
* 6 (A3W, 303 mm x 432 mm) represents the largest supported scanning area.
0: A3 1: B4, 2: A4, 3: A4 Landscape 4: B5, 5: B5 Landscape
6: A3W (303 mm x 432 mm) 7: Foolscap, 8: Ledger, 9: Legal
10: Letter, 11: Letter Landscape 12: Statement, 13: Statement Landscape
14: A5, 15: A5 Landscape, 16: B6 17 : B6 Landscape, 18: Postcard
0: Simplex, cover
0 only
1: Duplex
16 0-256
16 0-256
16 0-256
Setting
value of 81-175
05900
Setting
value of 98-158
05901
Setting
value of 123-133
05902
0: Operation
permitted
0
1: Operation
prohibited
[ 16-90 ]
OPTIONS / Scanner
Description
Specifi es the surface scanned in test modes 05430 (AF
scanning, continuous cycles) and 05431 (AF original
transfer operation).
Set threshold of white level correction.
White level correction will be OFF if the value (change
amount of the white level reference value of Red) received
from the profi le mode is lower than the value set in this test
mode.
Same explanation with TM5706 (Change from Red to
Green)
Same explanation with TM5706 (Change from Red to Blue)
Adjusts the lateral position for originals scanned on the FB.
Images are moved as follows. Minimum value (81): -2.0 mm
relative to the reference position. Maximum value (17 5):
+2.0 mm relative to the reference position.
Negative values move images left, positive values move
images right.
(1=0.04233mm)
Adjusts the starting position (the amount to skip before
scanning) for originals scanned on the FB.
Images are moved as follows. Minimum value (93): -2.6 mm
relative to the reference position. Maximum value (163):
+2.6 mm relative to the reference position.
Negative values move images toward the trailing edge,
positive values move images toward the leading edge.
(1=0.0753mm)
Adjusts the speed (image stretching/shrinkage) for originals
scanned on the FB.
Adjusts the speed of the FB read pulse motor.
The speed is adjusted as follows. Minimum value (123):
-0.5% relative to the reference speed. Maximum value
(133): +0.5% relative to the reference speed.
Negative values stretch the image, and positive values
shrink it.
(1=0.1%)
Specifi es whether scanner operation is locked. (Operation
permitted/operation prohibited)
When you specify 1 (operation prohibited), the scanner
does not function except for downloads in normal mode (FB
or AF), AF initialization, and test mode 0571 5 (scanner lock
setting).When scanner operations other than downloads in
normal mode (FB or AF), AF initialization, and test mode
0571 5 (scanner lock setting) are requested, error U06-4330
occurs, indicating that the scanner is locked and operation
is prohibited.