Sending And Printing Data - Riso MZ 10 Series User Manual

■ Sending and Printing Data

Follow the procedures given below to print out document data directly
on your RISO printer.
If the corresponding RISO Printer Driver has not been installed in
your computer yet, install it first, referring to the section "Installing the
Printer Driver" on page
IMPORTANT!
• The maximum print area is different depending on the model of RISO printer.
If you want to know the maximum print area of your document, consult the
user's guide of your RISO printer.
• For other limitations, also read the user's guide of your RISO printer.
Turn on your RISO printer and load paper.
Load the proper paper to be printed.
Specify the print job in the [Print] dialog box.
Turn on your computer and start Windows.
Open the document file to be printed, select [Print] in the [File] menu to open
the [Print] dialog box.
Select a Printer Driver.
Select a Printer Driver that supports your printer from the [Printer Name] list.
To print from a USB Flash Drive, select [Printer Name (USB flash)] and con-
nect the USB Flash Drive to your computer. (Not available for EZ3x1/EZ2x1
series)
8.
Working with the Printer Driver

Sending and Printing Data

49