Printing
Sending Print Data
The print data sent to the print controller is printed
with the machine using "αStream".
^
^
•
"αStream" is an output application that
processes print data. It is always running when
the power of the print controller is on.
•
For the printing method and settings of print
controller, see the user's guide for the print
controller.
Select data to print via "αStream".
1
Check the print settings via
2
"αStream".
Check the paper settings on the
3
operation panel.
You can check the paper settings on the [System
Info] - [Consumables] screen.
Also, make sure correct paper is inserted in the
specified feed tray, and the remaining amount of ink
is sufficient.
On the print controller, Click [Start].
4
Print data will be sent to the machine, and the
printing starts automatically.
^
^
•
When printing stops by an error, click
[Start] again on the print controller after
resolving the problem following the
instructions in the displayed message.
^
^
Changing the Settings
Select data to print via "αStream".
1
Change the print settings via
2
"αStream".
Change the paper settings on the
3
operation panel.
You can change the paper settings from [Paper Tray
Setting] on the [System Info] - [Consumables]
screen.
Also, make sure correct paper is inserted in the
specified feed tray.
About Jobs
VALEZUS T1200 User's Guide
33