Riso ComColor X1 series Technical Manual page 365

Electronic Compnents
LVDS (low-voltage differential signaling)
A communication specifi cation enabling high-speed transmission at several hundred Mbps.
Controlled by the northbridge (described above).
Used in high-speed digital communication with the LCD panel.
Expansion board interface:
PCI (peripheral component interconnect) bus, for high-speed data transfer with expansion boards
The Recording data Generating PCB is inserted vertically in this expansion slot.
LAN controller
Controls network communication.
Dual 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet channels are provided for communication with
connected equipment.
External interfaces
Controls the interface with peripheral equipment (connection and communication control).
LAN1
For connection to a computer
LAN2
For connection to an external controller (PS)
USB (four USB 2.0 ports)
For connection to a scanner, USB memory devices, and similar equipment
RGB output (analog)
Normally not used
Rev.1.00
Cntroller
PC
[ 14-14 ]
For connection of an external
PS controller
For connection to a PC
For connection of USB
memory devices, scanner
units and other devices