8. Removal of units
8-1. Removal of I/F Module from the Finisher main unit.
(1) Remove following covers.
• Top cover
• I/F Module front door
• Rear cover
• Front blind cover
(2) Unplug the Connectors of the wires from the Finisher main body, and free the wires from the Wire clamps.
Top Cover
Front blind cover
I/F Module front door.
Remove a Clip from the Top Hinge, and unhook the
door from the two hinges.
The wires to unplug are the two (2) wire to the Finisher Main PWB
and one (1) from the Relay connector.
Release wires from the Wire Clamps.
[ 24-21 ]
Multifunction Finisher II (option)
x1 Series ComColor (Revision 0.9)