Riso ComColor X1 series Technical Manual page 435

Panel Messages
X
Details A problem has occurred that prevents normal paper transfer.
Solution Users resolve these errors.
Users are only notifi ed in modes where there is a possibility that the relevant unit
may be used. If users switch to a mode in which the unit is not used, notifi cation is
Notifi cation
canceled. Note that even in modes where the unit is not used, error status can be
checked by referring to error LEDs.
Only operating modes that do not use the unit can be accessed until the error is
Operation
cleared.
Resuming Jobs It is possible to resume jobs interrupted by the error.
Mechanical operations are promptly stopped when these errors occur, to avoid
Other
causing other damage.
Y
Details Consumables must be replaced or waste material must be removed.
Resuming Jobs It is possible to resume jobs interrupted by the error.
After the condition of the error occurs, normal operation is continued to the extent
Other
possible until a convenient time to stop processing.
I
A situation has occurred that users must be informed about, such as the time for
Details
regular part replacement.
Users respond to the tip, which can be cleared by users through panel operations.
Solution
However, a permanent solution will require service by a service technician.
Users are only notifi ed in modes where there is a possibility that the relevant unit
may be used. If users switch to a mode in which the unit is not used, notifi cation is
Notifi cation
canceled. Note that even in modes where the unit is not used, information status can
be checked by referring to error LEDs.
Operation Conditions for information messages do not affect current processing.
W
Details A problem has occurred that users must be warned about.
Solution Users respond to warnings, which can be cleared by users through panel operations.
Users are only notifi ed in modes where there is a possibility that the relevant unit
may be used. If users switch to a mode in which the unit is not used, notifi cation is
Notifi cation
canceled. Note that even in modes where the unit is not used, warning status can be
checked by referring to error LEDs.
After the condition of the warning occurs, normal operation is continued to the extent
Operation
possible until a convenient time to stop processing.
It is possible to resume jobs interrupted by the warning. (However, some warnings
Resuming Jobs
prevent jobs from being resumed.)
Jam Errors
Supply Errors
Information
Warnings
[ 15-4 ]