Drive Checking (M) - Riso ComColor X1 series Technical Manual

Drive Checking (M)

No. Process Name
Compile Eject Motor Normal Direction Drive
4243
(Speed 3)
Compile Eject Motor Normal Direction Drive
4244
(Speed 4)
Compile Eject Motor Normal Direction Drive
4245
(Speed 5)
Compile Eject Motor Reverse Direction Drive
4246
(Speed 1)
4247 Manual Decurler Switch 1 LED
4248 Manual Decurler Switch 2 LED
4249 Manual Decurler Switch 3 LED
SCT Exit Motor Normal Direction Drive (Middle
4250
Speed)
SCT Exit Motor Normal Direction Drive (Low
4251
Speed)
SCT Exit Motor Reverse Direction Drive (Low
4252
Speed)
Compile Eject Motor Normal Direction Drive
4253
(Speed 1)
Compile Eject Motor Reverse Direction Drive
4254
(Fast Speed)
4255 Interposer Feed Motor
4256 Booklet Paper Path Motor Drive (Fast Speed)
Booklet Paper Path Motor Drive (Middle
4257
Speed)
4258 Booklet Paper Path Motor Drive (Low Speed)
Booklet Folder Roll Motor Drive Normal
4259
Direction
Booklet Folder Roll Motor Drive Reverse
4260
Direction
4261 Tray Belt Drive Motor Drive
4262 Booklet Paddle Motor Drive
4265 Folder Drive Motor 2 Drive
4266 Folder Drive Motor 1 Drive
4267 Folder Entrance Motor Drive (Fast Speed)
4268 Folder Entrance Motor Drive (Low Speed)
4269 Folding Solenoid 1 ON/OFF
4270 Folding Solenoid 2 ON/OFF
4271 Interposer Transport Roller
4272 Envelope Tray LED 1
4273 Folder C Solenoid ON/OFF
4274 Decurler Clutch ON/OFF
4275 Decurler Motor ON/OFF
OPTIONS / Finisher
Description
Drives the compile eject roller at 404 mm/s in the normal direction.
Drives the compile eject roller at 320 mm/s in the normal direction.
Drives the compile eject roller at 285 mm/s in the normal direction.
Drives the compile eject roller at 800 mm/s in reverse.
Turn ON or OFF of the Manual decurler switch 1 LED.
This test mode should be ignored due to the reason that there is no
manual decurler function on this Finisher.
Turn ON or OFF of the Manual decurler switch 2 LED.
This test mode should be ignored due to the reason that there is no
manual decurler function on this Finisher.
Turn ON or OFF of the Manual decurler switch 3 LED.
This test mode should be ignored due to the reason that there is no
manual decurler function on this Finisher.
Drives the top exit roller and T/A2 roller at 800 mm/s in the normal
direction.
Drives the top exit roller and T/A2 roller at 285 mm/s in the normal
direction.
Drives the top exit roller and T/A2 roller at 385 mm/s in reverse.
Drives the compile eject roller at 1,000 mm/s in the normal
direction.
Drives the compile eject roller at 1,000 mm/s in reverse.
Drives the Interposer feed roller.
This test mode should be ignored due to the reason that there is no
Interposer on this Finisher.
Drives the booklet IN roller at 800 mm/s.
Drives the booklet IN roller at 250 mm/s.
Drives the booklet IN roller at 50 mm/s.
Drives the booklet folding roller in the normal direction.
Drives the booklet folding roller in reverse.
Drives the belt to transfer booklets.
Drives the booklet paddle.
Drives folder export roller 2-7 , folding roller 1- 2, and the nip roller.
Drives folder export roller 1.
Drives folder entrance and exit rollers at high speed.
Drives folder entrance and exit rollers at low speed.
Turn ON or OFF of the folding solenoid 1.
Turn ON or OFF of the folding solenoid 2.
Turn ON or OFF of the Interposer transport roller clutch.
This test mode should be ignored due to the reason that there is no
Interposer function on this Finisher.
Turn ON or OFF of the Envelope tray LED 1.
This test mode should be ignored due to the reason that there is no
Envelope tray on this Finisher.
Turn ON or OFF of the Folder C Solenoid. (Pushes the fi nger
assembly against folding roller 2.)
Turn ON or OFF of the decurler clutch.
Starts and stops the decurler motor. (Runs at 200 mm/s.)
[ 16-63 ]
Test Modes
Rev.1.00