Riso ComColor X1 series Technical Manual page 511

Panel Messages
Type W184: MM Ejection Tray Error
Display
Paper stays in the mail maker ejector. Print cannot be run. Remove paper from the ejector.
Do one of the following.
• Press the Cancel button.
Clear
• Delete the print job.
• Remove the object from the sensor, then press the Continue button.
Point Description
3538
MM Eject Tray Full Detection Sensor is ON. (User to confi rm the object and remove from the ejection tray.)
Type W186: EVL Form Set Error (HCF/SPX)
Display Set envelope form in the high capacity feeder so that the star mark comes to the right front side.
Do one of the following.
• Place the paper on the paper feed tray.
Clear • Press the Tray change button. (Select the tray other than Paper Feed Tray)
• Press the Cancel button.
• Delete the print job.
Point Description
After specify [HCF] as [Mail form tray] in manually, it became the state of one of the following:
• There is no paper on the HCF
3718 1-2
• There is no appropriate paper on the HCF
(Mail form paper: Simplex paper transfer)
Type W187: EVL Form Set Error (HCF/DBL)
Display
Set envelope form in the high capacity feeder so that the circle mark comes to the left front side.
Do one of the following.
• Place the paper on the paper feed tray.
Clear
• Press the Tray change button. (Select the tray other than Paper Feed Tray)
• Press the Cancel button.
• Delete the print job.
Point Description
After specify [HCF] as [Mail form tray] in manually, it became the state of one of the following:
• There is no paper on the HCF
3719 1-2
• There is no appropriate paper on the HCF
(Mail form paper: Duplex paper transfer)
Type W188: No Paper on All Trays (Form 3)
Set envelope form ( ) in the direction below.
Display
High capacity feeder: Star to right front
Feed tray1–3: Circle to left front
Do one of the following.
• Place the paper on the any of paper tray.
Clear
• Press the Cancel button.
• Delete the print job.
Point Description
3736
There were no paper on all the tray. (Connected with the HCF) (Mail form paper: Simplex paper transfer)
Type W189: No Paper on All Trays (Form 4)
Set envelope form ( ) in the direction below. High capacity
Display feeder: Circle to left front
Feed tray1–3: Star to right front
Do one of the following.
• Place the paper on the any of paper tray.
Clear
• Press the Cancel button.
• Delete the print job.
Point Description
3737 There were no paper on all the tray. (Connected with the HCF) (Mail form paper: Duplex paper transfer)
[ 15-80 ]