Vertical Paper Feed Roller 1 (Vertical Paper Feed Unit B); Vertical Paper Feed Roller 2 (Vertical Paper Feed Unit B); Vertical Paper Feed Roller 3 (Vertical Paper Feed Unit B); Vertical Paper Feed Roller 4 (Vertical Paper Feed Unit B) - Riso ComColor X1 series Technical Manual

Hide thumbs Also See for ComColor X1 series:

Table of Contents

Vertical paper feed roller 4

Vertical paper feed roller 3

Vertical paper feed roller 2

Vertical paper feed roller 1

2-9. Vertical Paper Feed Roller 1 (Vertical Paper Feed Unit B)

1. Turn OFF the machine power and disconnect the power cable from the power source.

2. Remove vertical paper feed unit B. (Refer to the instructions for removal.)

3. Remove pulley assembly S2M30. (6 mm dia. E-ring (2 pcs))

4. Remove the metal bushing (2 pcs). (6 mm dia. E-ring (2 pcs))

5. Remove vertical transfer drive roller 1.

1. Turn OFF the machine power and disconnect the power cable from the power source.

2. Remove vertical paper feed unit B. (Refer to the instructions for removal.)

3. Remove pulley assembly 22S3M+30S2M. (6 mm dia. E-ring (2 pcs))

4. Remove the metal pieces (2 pcs). (6 mm dia. E-ring (2 pcs))

5. Remove vertical transfer drive roller 2.

1. Turn OFF the machine power and disconnect the power cable from the power source.

2. Remove vertical paper feed unit B. (Refer to the instructions for removal.)

3. Remove pulley assembly S2M30. (6 mm dia. E-ring (2 pcs))

4. Remove the metal pieces (2 pcs). (6 mm dia. E-ring (2 pcs))

5. Remove vertical transfer drive roller 3.

1. Turn OFF the machine power and disconnect the power cable from the power source.

2. Remove vertical paper feed unit B. (Refer to the instructions for removal.)

3. Remove pulley assembly 22S3M+30S2M. (6 mm dia. E-ring (2 pcs))

4. Remove the metal pieces (2 pcs). (6 mm dia. E-ring (2 pcs))

5. Remove vertical transfer drive roller 4.

Registration Section

ComColor Series (Revision 2.4)

Table of Contents