ACQuire:CCDF:COUNt <numeric_value>
This command sets the CCDF acquisition length.
The CCDF acquisition length can only be set when the CCDF free run sweep
NOTE
mode is enabled (refer to
page 119).
Syntax
Parameter
Item
numeric_value
Example
ACQ:CCDF:COUN 500MA
Keysight 8990B Programming Guide
ACQ
:CCDF
Description/Defaul t
A numeric value for the CCDF count:
– Default value: 100M
– Minimum value: 100M
– Maximum value: 10G
The value specified will be truncated to a multiple of 100M.
"ACQuire:CCDF:SWEep <character_data>"
Space
:COUN
This command sets the CCDF acquisition length
to 500M.
ACQuire Subsystem
on
numeric_value
?
Range of values
100M to 10G
4
87