Re-enabling an IES Service
Use the
CLI Syntax: config>service# ies service-id
Example:
Deleting an IES Service
An IES service cannot be deleted until SAPs and interfaces are shut down and deleted and
the service is shut down on the service level.
Use the following CLI syntax to delete an IES service:
CLI Syntax: config>service#
7705 SAR OS Services Guide
command to re-enable a previously disabled IES service.
no shutdown
no shutdown
A:ALU-41>config>service# ies 5
A:ALU-41>config>service>ies# no shutdown
A:ALU-41>config>service>ies# exit
ies service-id
interface ip-int-name
sap sap-id
no sap sap-id
interface ip-int-name
shutdown
exit
no interface ip-int-name
shutdown
exit
no ies service-id
shutdown
exit
Internet Enhanced Service
Page 349