Fail-Mode - Dell S6000 Reference Manual

Command EXEC Privilege
Modes
Command
Version 9.4(0.0)
History

fail-mode

Configures failure-mode on the platform.
S6000
Syntax
fail-mode secure
To disable the fail-mode secure, use the no fail-mode securecommand.
Parameters
secure
Defaults non secure
Command VXLAN INSTANCE
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
Version 9.4.
(0.0)
Usage
Information
Related vxlan-instance— Enable VXLAN Instance configuration on the platform.
Commands
vxlan-instance
Enable VXLAN Instance configuration on the platform.
S6000
Syntax
vxlan-instance instance ID
To enable the vxlan-instance command, use the [no] shut command.
1482
Introduced on the S6000.
Enter the keyword secure to delete all its database and
hardware flows/resources, when the VTEP loses connectivity
with the controller.
Introduced on the S6000.
Virtual Extensible LAN (VXLAN)