Samsung S5PC100 User Manual page 1117

CAMERA INTERFACE
2 FEATURES
The features of CAMIF include:
Multiple input support
♦ ITU-R BT 601/656 mode
♦ DMA (AXI 64bit interface) mode
♦ MIPI (CSI) mode
Multiple output support
♦ DMA (AXI 64bit interface) mode
♦ Direct FIFO mode
Digital Zoom In (DZI) capability
Multiple camera input
Programmable polarity of video sync signals
Supports maximum 8192 x 8192 pixels input
Image mirror and rotation (X-axis mirror, Y-axis mirror, 90°, 180° and 270° rotation)
Generates various image format
Supports capture frame control
Supports image effect
Table 9.3-1 Maximum Size (Refer to Appendix at end of the Chapter)
Scaler Scaler input Hsize (=PreDstWidth)
Scaler bypass mode
Output Rotator TargetHsize (without output rotation)
TargetHsize (with output rotation)
Input Rotator REAL_WIDTH (without input rotation)
REAL_HEIGHT (with input rotation)
NOTE: Scaler and Rotator maximum size depends on line buffer size.
NOTE: The max size of the Output rotator & input rotator is under the scaler on mode.
NOTE: Rotator memory shares CAMIF and Low-Power Audio. If you want to use rotator function, you must set the value of
LPMP3_MODE_SEL@LPMP3_MODE_SEL (0xE020_0308) as '0'. For more information refer to "Chapter 2.3 CLOCK
STRATEGY".
9.3-2
Item
S5PC100 USER'S MANUAL (REV1.0)
Max Size
CAMIF0 CAMIF1
3264 pixels 1280 pixels
8192 pixels 8192 pixels
3264 pixels 1280 pixels
1280 pixels 768 pixels
8192 pixels 8192 pixels
1280 pixels 768 pixels
CAMIF2
1440 pixels
8192 pixels
NA
NA
NA
NA