Display Description - Sirona CEREC MC Operating Instructions Manual

Dentsply Sirona
Operating Instructions (valid for USA) Sirona Dental CAD/CAM System
63 98 650 D 3439
D 3439.201.07.10.23 10.2017
5.4.3

Display description

These operating instructions describe how to operate the unit by
executing and confirming commands via your PC.
You can also confirm commands such as
"OK"
directly on the display of your milling and grinding unit.
Possible commands are then shown above the corresponding button on
the display. In the example shown, button 1, (A) would confirm the
"Start"
command
Display
A Button 1
B Button 2
C Button 3
D Button 4
5.4.4 Illumination of the processing chamber
The lighting of the processing chamber depends on the machining
operation involved:
Machining operation
Milling and grinding
Operation completed
"Stop"
Error or
and button 4, (D) would confirm the command
E
F
G
button pressed
5 Installation and startup
"Start" "Stop" "Cancel"
, ,
Command
Display
ON/OFF switch
Lighting color
White
Green
Red
or
"Stop"
.
21