Door Lock Striker - SSANGYONG Rexton 2004 Service Manual

11C-34
CHANGED BY
EFFECTIVE DATE
AFFECTED VIN

Door Lock Striker

1. Unscrew the screws and remove the door lock striker.
2. Install the door lock striker.
• Temporarily install the door lock striker.
• Adjust the location of door lock striker and fully
tighten the screws.
Door lock striker screws
Y220_11C072
Door Lock Striker Adjustment
Notice
The door lock striker is an important attaching part that
can affect the performance of vital components and
systems and can cause major repair expenses. If
replacement becomes necessary, the door lock striker
must be replaced by one with the same part number or
with an equivalent part. Do not use a replacement part of
lesser quality or of a substitute design. The specified torque
values must be used during reassembly in order to ensure
the proper retention of the part.
Y220_11C073
The door lock striker consists of a striker with two screws that
are threaded into a tapped, floating cage plate located in the
appropriate body pillar. This floating cage plate allows the striker
to be easily adjusted in or out and up or down. The door is
secured in the closed position when the door lock fork snaps
over and engages the striker.
20 ~ 28 Nm
EXTERIOR
REXTON SM - 2004.4