Auto Door Lock - SSANGYONG Actyon 2012.12 Manual

Table of Contents

Advertisement

28) Auto Door Lock

1.
The door lock system outputs "LOCK" when the vehicle speed maintains over 50 km/h.
However, it doesn't output "LOCK" when all doors are locked or failed.
2.
If any of doors is unlocked after outputting "LOCK" in step 1, outputs "LOCK" up to 5 times (except
step 1) at the interval of one second.
3.
If any of doors is unlocked after 5 times of "LOCK" outputs, the door is regarded as "FAIL".
4.
If the door that was regarded as fail changes (UNLOCK to LOCK) to unlock, only one "LOCK" output
will be done.
5.
If any door is regarded as FAIL, the auto door lock function does not work (if it is occurred when the
vehicle speed is over 50 km/h, the auto door lock output does not occur even if the vehicle speed
falls below 50 km/h and accelerates again to over 50 km/h.). Nonetheless, the central door lock
function works properly.
6
When the system receives "UNLOCK" signal from a door switch, it outputs "LOCK" signals 5 times. If
additional "LOCK" signal from another door switch is detected during the period, the system outputs
five "LOCK" signals 5 times for the door.
7.
The door lock system outputs "UNLOCK" automatically if the "LOCK" output conditions are
established by this function or the key is cycled (IGN1=OFF) (even when there is no "LOCK" output
while the vehicle speed maintains over 50 km/h under lock condition).
(If the LOCK condition is established with the ignition switch ON, the system outputs UNLOCK signal
unconditionally when turning the ignition switch to OFF position.)
However, when the ignition key is turned to "OFF" position, the lock output conditions will be
cancelled.
8.
The "FAIL" condition of the door will be erased when the ignition key is turned to "OFF" position.
03-43
8710-01

Advertisement

Table of Contents
loading

Table of Contents