Envelope Feeder
Downloaded from
www.Manualslib.com
manuals search engine
1
Pull out the tray extension.
2
Adjust the paper guide to the size of the envelopes or
postcards you are going to use.
To avoid paper jams, make sure the guide is
adjusted to the correct width of envelopes or
postcards.
3
Lift up the paper holder, align the four corners of the stack
and gently insert them (envelopes flap down on left side)
into the inlet until they reach the back.
When correctly loaded, the trailing edge of the
stack will not be even.
4
Lower the paper holder onto the stack.
Chapter 2: Loading Print Media
Loading Paper
2-13